1 / 42

SAFRAN

SAFRAN. Upgraded to support the implementation of the Borehole Disposal Concept. Rodolfo Avila, Facilia AB. Outline. Description of SAFRAN Adaptation to support the implementation of the BDC. Generic Operational Safety Assessment (GOSA). What is SAFRAN.

brentnixon
Download Presentation

SAFRAN

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SAFRAN Upgraded to support the implementation of the Borehole Disposal Concept Rodolfo Avila, Facilia AB

  2. Outline • Description of SAFRAN • Adaptation to support the implementation of the BDC. • Generic Operational Safety Assessment (GOSA)

  3. What is SAFRAN • SAFRAN is a software package for safety assessment in pre-disposal waste management. • It implements the methodology developed within the IAEA project SADRWMS (2005-2010)

  4. SADRWMS methodology Provides detailed guidelines for safety assessment. Based on the IAEA safety guide DS284: The Safety Case and Safety Assessment for Predisposal Management of Radioactive Waste

  5. The SADRWMS methodology • Provides detailed advice for each step of the Safety Assessment • Describes the different types of assessments that might be required • Provides methods for Hazard identification and screening • Provides methods for performing qualitative and quantitative assessments for different scenarios

  6. Disposal Borehole Design & Construction Borehole Diameter – 260mm Length – variable Casing Diameter – 160mm Length - variable Disposal Container Diameter – 115mm Length – 250mm Capsule Diameter - 21/48mm Length – 110/121mm

  7. Disposal container (with concrete insert) and container lid. Bottom row: sealed capsules in two sizes.

  8. Emplacement and Borehole Closure

  9. Pre-disposal Activities

  10. Construction of a borehole using percussion drilling

  11. SAFRAN components SAFREQ Report System description Site features, waste producers, waste streams Safety Assessment Normal Operation, Accidents Report Regulatory Framework SAFCALC DATABASE

  12. System Description For each configuration • Site • Facilities • Rooms • Areas (Storage or Processing) Safety elements • Waste Management Activities • Processes • Check for clearance • Waste Producers • Primary Waste Components • Waste Streams

  13. Safety elements • Site selection • Safety functions • Limits and conditions • Mantainance requirements • Operational procedures • Emergency procedures • Management systems Can be linked to physical elements and assessments

  14. Waste management activities • Description • Output(s) from activities • Reduction factors • One and only one WMA can be assigned to an area A process is a sequence of WMAs which can be used in defition of Waste Streams (WS)

  15. Waste Streams • Waste streams represent the fate of waste components through different steps of processing, storing and clearing of wastes • Accounting for changes in waste properties by waste management activities at each step.

  16. Additions for BDC • The user can define that one or more boreholes will be considered at a Site • A library of safety elements of relevance for BOSS will be added • A library of pre-disposal waste management activities relevant for BOSS • A library of processes

  17. Additions for BDC • A library of sources • SIMBOD – tool for management of the Borehole Disposal process • Typical waste streams – resulting from application of Typical Processes to different Types of Sources Sources – Conditioned - Packaged

  18. SAFRAN components SAFREQ Report System description Site features, waste producers, waste streams Safety Assessment Normal operation, accidents Report Regulatory Framework SAFCALC DATABASE

  19. Assessment types • For normal operation and accidents. • Doses to workers and members of the public. • Radiological impacts indoors and outdoors.

  20. Graded approach to the assessments Impacts Calculations of Hazard Quotients (HQ) for standardized conservative exposure situations Screening or Hazards calculations for specified endpoints and expecific exposure conditions Dose Assessment

  21. Assessments for accidents PIE Type PIE 1 PIE n Scenario 1 Scenario n Scenario m Impact 1 Impact n Impact m Screening of hazards Endpoint 1 Endpoint n Ass Case 1 Ass Case n

  22. Example of Probability-Consequence plots

  23. Additions for BDC • Update of the PIE database • Library of typical scenarios • Library of generic safety assessments

  24. SAFRAN components SAFREQ Report System description Site features, waste producers, waste streams Safety Assessment Normal operation, accidents Report Regulatory Framework SAFCALC DATABASE

  25. Models available in SAFCALC • IAEA SR-19 models: screening models for routine releases to the atmosphere, lakes, rivers, estuarines and coastal areas. • Model for accidental releases to the atmosphere. • Model for accidental releases inside a room. • Simple dosimetry models: point source, disc, cylinder, cube (with and without shielding)

  26. SAFRAN components SAFREQ Report System description Site features, waste producers, waste streams Safety Assessment Normal operation, accidents Report Regulatory Framework SAFCALC DATABASE

  27. Database • Radionuclide half lives. • Clearance levels. • Gamma constants – dose rates at 1 m from a point source. • Screening dose rates for Normal and accidental situations. • Screening release rates for Normal operation. • Screening releases for accidental situations. • Release Fractions. • Dispersion factors. • Dose Conversion Factors for Normal and accidental situations.

  28. Additions for BOSS • Models and calculation methods used in Generic Operational Safety Assessment (GOSA). • Parameter values required for GOSA.

  29. SAFRAN components SPECIALIZED LIBRARIES FOR BOSS SAFREQ Report System description Site features, waste producers, waste streams Safety Assessment Normal operation, accidents Report Regulatory Framework SAFCALC DATABASE

  30. SAFREQ • Tool for assistance in developing the safety case by assessing compliance with Safety Requirements and Safety Guidelines.

  31. Additions for BOSS • Going from a prototype to a Released version • Specific guidelines for safety case of BDC

  32. Generic operational Safety assessment (GOSA)

  33. Assessment Context • The assessment context of the GOSA should be consistent with the generic safety assessment (GSA) for borehole disposal (IAEA Safety Series Report: Generic Post-Closure Safety Assessment for Borehole Disposal of Disused Sealed Sources)

  34. Purpose • The purpose of the GOSA is to demonstrate that the proposed pre-disposal waste management activities are done in a safe manner, as required by the regulatory framework. The safety of operators (workers) and members of the public will be assessed, both for normal operations and for potential accidental situations.

  35. Scope • The starting point for the GOSA is that the Disused Sealed Sources (DSSs) have arrived at the site and a decision has been taken to “dispose” the DSS by borehole disposal • Activities of the original producer [e.g. hospital] and transport to site are beyond the scope of the current project). • Other disposal options (e.g. disposal in a near-surface or deep facility) and management options (long-term storage) are beyond the scope of this GOSA.

  36. Inventory to be considered • The inventory (Bq) and number of sources to be assessed in the GOSA need to be representative of what is found in practice in different countries. • An initial proposal is to consider two cases: a country (Ghana being an example) with a low to medium inventory of relatively low level activity sources that do not require the use of hot cells, and a country (South Africa being an example) with a medium to large inventory which includes high activity sources that will require the use of hot cells. • Different initial states of the sources should be considered, including sources in the original devices, in a transport package, in the working container, and conditioned in cement.

  37. Regulatory Framework • IAEA Safety Standards will be used as the basis for the regulatory framework. • This will include normal operation and accidental situations, taking into account dose constraints as well as dose limits. • One issue currently under evaluation is whether to include assessment of doses to the eye, extremities, etc., in addition to whole body doses.

  38. Typical activities and their duration

  39. Examples of accidental scenarios (hot cell) • The situation where the operation team is unaware that the source has an activity greater than the value for what the facility was designed for and the team proceeds with standard operations. • Error during the determination of the density of the shielding material (sand) in the hot cell and the operation proceeds with a sand density below design requirements. • Situation with the ZnBr2 window density below design requirements being used by the operation team. • Source is dropped after being removed from the original source shield. • The source is found to be leaking when removed from the original source shield inside the hot cell. (Could have been damaged during removal). • The manipulators malfunction whilst the source is inside the hot cell. • The biological shield is damaged while bringing in the original source shield. • Power outage in the hot cell. • Lights are not operational in the hot cell.

More Related