1 / 17

Intelli-Fit™ Constant Work Tutorial

Learn how to use Intelli-Fit™ Constant Work program, adjust pedal resistance, set time and wattage, view workout metrics, use Power Burst and fan, pause/stop workout, cool down, and save results.

brentnixon
Download Presentation

Intelli-Fit™ Constant Work Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Intelli-Fit™ Systems TutorialConstant Work

  2. Constant Work Constant work is a Watts based program. Pedal resistance is automatically adjusted to compensate for any change in pedal speed (RPM’s), therefore the workload (Watts) will remain constant at any given setting. Simply put: Higher the workload (watts) = Lower RPM’s Lower the workload (watts) = Higher RPM’s

  3. Intelli-Fit™ Buttons used in the Constant Work program Constant Work Fit-Key Pause/Clear Enter Upand Down Arrows The Pause/Clear button can be used any time during exercise to pause the program or to end it.

  4. Constant Work To Start: • Press the Constant Work Button 2. Press Enter There are instructions at the top of the console to guide you through the steps of establishing a program.

  5. Constant Work • Select the time using the up and down arrows. • Time is adjustable in 15 second increments. • Lowest time is 2 minutes and goes up to 99 minutes. • The default time is 15.00 minutes. 4. Press Enter

  6. Constant Work • Adjust your watts using the up and down arrows. • Watt ranges between 10-999 watts . • If you press and hold the up and down arrows it will adjust your watts in 10 watt increments. • Default watts is at 20. 6. Press Enter

  7. Constant Work • Select user weight using the up and down arrows. • The weight ranges from 20 lbs – 550 lbs. • If you press and hold the arrow button, the weight will adjust in 10 lb increments. • Default weight is 150 lbs. 8.Press Enter. 9. Press Start

  8. Change view screen options #1 #2

  9. View 1 • Read-outs include: • Time • Miles • RPM • Watts • METs • Heart Rate • Calories • Progress Bar At any time during your workout, press ‘Change View’ button to move to 2nd view.

  10. View 2 • Read-outs include: • Time • Heart Rate • RPM’s • Watts • Progress Bar Press ‘Change View’ button to move back to view 1.

  11. Power Burst The Intelli-Fit™ console gives you a Power Burst of Iso-Strength. It can be used any time and as often as you want during your work-out. • Press the ‘Power Burst’ button to get started. • It will count down 5 seconds before it will begin. • the burst will last approximately 8 seconds. The Power Burst will automatically turn off after the 8 seconds is over and return to used view screen.

  12. Fan There is a fan built in to the console allowing 3 speeds at low – medium – high. • Press ‘Fan’ button on your far right. • Press fan button 1, 2 or 3 times to select your desired speed. • On the 4th press, it turns the fan off.

  13. Pause/Stop At any time during your work-out, you can press the pause/clear button below to pause the work out. Press the pause/clear button again and your work out will be cleared or stopped.

  14. Cool Down After your Constant Work program is completed, the console automatically goes into cool down mode. • Default time starts at 5:00. • Heart rate is still readable. • Fan options are still available. During the cool down period, results from the workout are given. Results presented are: Peak Watts Average Watts Peak Heart Rate Average Heart Rate Total Calories

  15. Save Results The Intelli-Fit console allows you to save your results on to a USB Fit-Key. Simply plug the key into the Fit-Key slot and press ‘Save Results’ and then remove key. The results are then saved in a text file to upload onto your computer for saving and printing.

  16. Plug the key into your computer and the results are shown as below

  17. Video Tutorial Click Here to View Video Tutorial

More Related