1 / 86

NETE0510 Physical Layer Protocols and Access Technologies

NETE0510 Physical Layer Protocols and Access Technologies. Supakorn Kungpisdan supakorn@mut.ac.th. Outline. Physical Layer Protocols and Interfaces Accessing the Network Copper Access Technologies Cable Access Technologies Fiber Access Technologies Air Access Technologies. Physical Media.

brad
Download Presentation

NETE0510 Physical Layer Protocols and Access Technologies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NETE0510Physical Layer Protocols and Access Technologies Supakorn Kungpisdan supakorn@mut.ac.th NETE0510: Communication Media and Data Communications

  2. Outline • Physical Layer Protocols and Interfaces • Accessing the Network • Copper Access Technologies • Cable Access Technologies • Fiber Access Technologies • Air Access Technologies NETE0510: Communication Media and Data Communications

  3. Physical Media • Three major types of physical media • Copper • Twisted-pair, coaxial, twin-axial (twin-ax), broadband (used in CATV) • Fiber • Resistance to electromagnetic signals, not affected by crosstalk, interference, but require more protection • Air • Point-to-point wireless, wireless LAN, cellular, microwave, or satellite NETE0510: Communication Media and Data Communications

  4. RS-232, ITU-T V.24/V.28 • EIA RS-232 (or EIA-232 or most recent TIA-232) are defined by the Electronic Industries Association (EIA) as synchronous interface standards for use with the physical layer • D-shaped 25-pin connector (DB25) DTE interface to voice-grade modems (DCE) • TIA: Telecommunications Industry Association • EIA: Electronic Industries Alliance • ITU V.24/V.28 is similar to RS-232 and provides the international version of the RS-232 standard • V.24 defines physical interface and V.28 defines electrical interface NETE0510: Communication Media and Data Communications

  5. RS232 NETE0510: Communication Media and Data Communications

  6. RS-232 (cont’d) • The standard does not define bit rates for transmission, although the standard says it is intended for bit rates lower than 20 kbps. • Many modern devices can exceed this speeed (38.4 kbps and 57.6 kbps being common, and 115.2 kbps and 230.4 kbps making occasional appearances) while still using RS232 compatible signal levels. • In general, terminals have male connectors with DTE pin functions, and modems have female connectors with DCE pin functions • Full RS232 requires 25-pin connector, whereas only 22 pins are used. Since most devices, especially PC, use only a few signals, smaller connectors can be used, e.g. 9-pin connector(DB9) • More about RS232 • http://www.camiresearch.com/Data_Com_Basics/RS232_standard.html • http://www.taltech.com/resources/intro-sc.html NETE0510: Communication Media and Data Communications

  7. RS-232 (cont’d) HW flow control NETE0510: Communication Media and Data Communications

  8. NETE0510: Communication Media and Data Communications

  9. 25-pin RS232 Pinouts NETE0510: Communication Media and Data Communications

  10. Data Transmission NETE0510: Communication Media and Data Communications

  11. 9-pin RS232 Pinouts NETE0510: Communication Media and Data Communications

  12. DB25-to-DB9 Adapter • Use this to adapt a 25-pin COM connector on the back of a computer to mate with a 9-pin serial DCE device, such as a 9-pin serial mouse or modem. NETE0510: Communication Media and Data Communications

  13. DB9-to-DB25 Adapter • Use this to adapt a 9-pin COM connector on the back of a computer to mate with a 25-pin serial DCE devices, such as a modem NETE0510: Communication Media and Data Communications

  14. Null Modem • Use this female-to-female cable in any application where you wish to connect two DTE devices (for example, two computers). A male-to-male equivalent of this cable would be used to connect two DCE devices. NETE0510: Communication Media and Data Communications

  15. HSSI • HSSI is a physical interface at speeds up to 52 Mbps • Become standard interface between DS3 rate of 45 Mbps and the OC-1 SONET interface of 51.84 Mbps for everything from WAN connectivity to a DTE-DCE direct-channel interface NETE0510: Communication Media and Data Communications

  16. HSSI (cont’d) Fiber-optic modem Rack NETE0510: Communication Media and Data Communications

  17. IEEE802 Physical Interfaces • 3 common MAC physical interfaces for the IEEE 802 architecture model are: • Ethernet (802.3) • Token Ring (802.5) • Wireless LAN (802.11) NETE0510: Communication Media and Data Communications

  18. 10-Mbps (Legacy) Ethernet • Many different types of Ethernet access: • 1 Base5, 10Base2, 10Base5, 10BaseF • Each type defines both wiring and device terminating the end of the wiring • 10Base5 (Thicknet) and 10Base2 (Thinnet) • 10 refers to 10-Mbps Ethernet • Base stands for baseband • Baseband signaling indicates that Ethernet signals are the only signals carried over the media system • Most common connectivity is via twisted-pair using 10BaseT or 100BaseT standards with no more than 100 m from central bus or switch NETE0510: Communication Media and Data Communications

  19. Comparisons of Ethernet Cabling Specifications NETE0510: Communication Media and Data Communications

  20. Fast Ethernet • 100 Mbps, new preferred standard • FastEthernet specifications include mechanisms for autonegotiation of the media speed. • Vendor can produce dual-speed Ethernet interfaces that can be installed and run at either 10 Mbps or 100 Mbps automatically • Autonegotiation allows the devices to perform automatic configuration to achieve the best possible mode of operation over a link NETE0510: Communication Media and Data Communications

  21. Fast Ethernet (cont’d) • Three media varieties • 100BaseTX: uses 2-pair Category 5 UTP cable • TX segment type is a twisted-pair segment that uses two pairs of wires and is based on data grade twisted-pair physical medium standard developed by ANSI • 100BaseFX: uses fiber-optic cable • FX is based on fiber-optic physical medium standard developed by ANSI and uses two strands of fiber cable • 100BaseT4: uses 4-pair Category 3, 4, or 5 UTP cable • T4 segment type is a twisted-pair segment that uses four pairs of telephone-grade twisted-pair wire NETE0510: Communication Media and Data Communications

  22. Gigabit Ethernet • Idea when budget is tight but require higher bandwidth • Employ all the same specifications defined by the original Ethernet standard, including the same Ethernet frame format and size • 1000BaseT physical layer provides 1-Gbps Ethernet signal transmission over four pairs of Cat-5 UTP cable • Use five-level (PAM-5) encoding along with four wire pairs, able to provide 250 Mbps per pair • Can transmit signal for 100 m over twister-pair cable and longer with fiber-optic cable NETE0510: Communication Media and Data Communications

  23. Gigabit Ethernet (cont’d) • 1000BaseT: use 4-pair CAT-5 balanced copper cabling and a 5-level coding scheme • 1000BaseCX: use 150-ohm shielded copper cable and supports a max length of 25 m • 1000BaseF: use fiber-optic • 1000BaseFX: use 62.5/125 multimode fiber and supports a max distance of 412 m • 1000BaseSX: use 50/125 or 62.5/125 multimode fiber with max distance of 550 m • 1000BaseLX: use 9/125 single-mode, 50/125 multimode, or 62.5/125 multimode fiber with max distance of 5 kms • 1000BaseZX: use 9/125 single-mode fiber with max distance of 100 kms • 10-Gbps Ethernet: only fiber-optic cable NETE0510: Communication Media and Data Communications

  24. Step-index Profile The proportion between diameters of core and cladding e.g. 62.5/125 (µm) NETE0510: Communication Media and Data Communications

  25. Token Bus and Token Ring • Physical interface for IEEE802.4 Token Bus and IEEE802.5 Token Ring is the DB connector, interfacing with IBM Type 1 shielded twisted-pair cable. • Token ring: Physical star, logical ring • Uses special 3-byte frame called a token travelling around the ring. • Coaxial cable connections are also available (for Token Bus) • Token ring LAN speeds of 4, 16, 100 Mbps and 1 Gbps have been standardized by the IEEE 802.5 working group. • Token Ring is usually run in Type 1 (2-pair STP), Type 2 (4-pair STP), Type 3 (UTP), and Type 5 (fiber-optic cable) MDI port: medium dependent interface used to connect to other hub or switch without crossover cable required Media access unit (provide logical ring) NETE0510: Communication Media and Data Communications

  26. Physical Media Comparison NETE0510: Communication Media and Data Communications

  27. Wireless LAN (IEEE802.11) • IEEE802.11 specifies connectivity between LAN devices using radio-based equipment • 802.11 is similar to 802.3 for wired LANs but use CSMA/CA instead of CSMA/CD • Collision detection cannot be used for radio frequency transmission because when a node transmits over the air, it cannot hear other nodes on the network • Support two types of operating configurations: • Adhoc or independent  do not need an access point • Infrastructure  need an access point • Access point acts as a bridge in a wired LAN NETE0510: Communication Media and Data Communications

  28. Wireless LAN (cont’d) NETE0510: Communication Media and Data Communications

  29. Wireless LAN (cont’d) NETE0510: Communication Media and Data Communications

  30. Outline • Physical Layer Protocols and Interfaces • Accessing the Network • Consumer • Corporate or Business • Copper Access Technologies • Cable Access Technologies • Fiber Access Technologies • Air Access Technologies NETE0510: Communication Media and Data Communications

  31. Consumer or Residential Alternatives • Existing copper phone line: • Plain old telephone service (POTS) • Dialup • ISDN • Basic rate interface (BRI) • DSL • Cable line • Cable modem • Wireless • Direct broadcast satellite (DBS) • Very small aperture satellite (VSAT) NETE0510: Communication Media and Data Communications

  32. Consumer or Residential Alternatives NETE0510: Communication Media and Data Communications

  33. Last-Mile Link • The link that spans the last mile from the home to a network service provider • Such services typically connect a home to an existing network NETE0510: Communication Media and Data Communications

  34. Corporate or Business Access Alternatives • Copper • All consumer methods • DS1, FT3, DS3 • ISDN • Fiber • DS3 • SONET OC-N NETE0510: Communication Media and Data Communications

  35. Corporate or Business Access Alternatives NETE0510: Communication Media and Data Communications

  36. Outline • Physical Layer Protocols and Interfaces • Accessing the Network • Copper Access Technologies • Cable Access Technologies • Fiber Access Technologies • Air Access Technologies NETE0510: Communication Media and Data Communications

  37. UTP • A transmission repeater system over a four-wire twisted-pair is defined and called a t-carrier system e.g. T1 system • Signal and service is referred as a DS1 • T1 circuits are brought to the customer location via either copper or fiber • UTP is very popular type of copper wiring NETE0510: Communication Media and Data Communications

  38. UTP Ratings (EIA/TIA Standards) • Category 1 • used for voice and low-speed data transmission up to 56 kbps • Category 2 • Ideal for 4-Mbps token ring, RS-232, RS-422, and AS/400 • Category 3 • Ideal for telephone, 4-Mbps token ring, and 10BaseT applications • Category 4 • Used for 16-Mbps token ring • Category 5 • Suitable for 100BaseT Ethernet, 10-Mbps token ring, and OC-3 ATM • Category 5e • Support speed up to 1.2 Gbps and typically used for Gigabit Ethernet • Category 6 • Newly designed for Gigabit Ethernet and future apps NETE0510: Communication Media and Data Communications

  39. Dialup or Legacy Analog Modem • Current standard for 56-Kbps modem is V.92 • Prior to 56-Kbps modems, the best speed between two modems was 33.6 Kbps. • With V.90, connection speeds can exceed 50 Kbps • Up to 54 Kbps download, 33.6 Kbps upload • V.92 provides 56 Kbps with enhancements: • Upload speed increased to 48 Kbps: • improve video conferencing and file uploading • Startup time reduced from about 20 seconds to about 10 seconds • Internet call waiting • Receive a call while the modem is still connected NETE0510: Communication Media and Data Communications

  40. Dialup or Legacy Analog Modem NETE0510: Communication Media and Data Communications

  41. ISDN • ISDN provides one of the best disaster discovery alternatives for services such as Fame Relay and IP (VPNs and Internet access) • Built on the TDM hierarchy developed for digital telephony • ITU-T defines two standards for physical interface to ISDN • BRI (Basic Rate Interface) • PRI (Primary Rate Interface) • The physical layer provides transmission capability, activation, and deactivation of terminal equipment (TE) and network termination (NT) data (D)-channel access for TE, maintenance functions, and channel status indications NETE0510: Communication Media and Data Communications

  42. ISDN (cont’d) NETE0510: Communication Media and Data Communications

  43. ISDN Devices NETE0510: Communication Media and Data Communications

  44. ISDN Devices NT1 or NT2 Terminal Adapter ISDN PCI card ISDN router (TE1) NETE0510: Communication Media and Data Communications

  45. ISDN Reference Points • R — References the connection between a non-ISDN compatible device TE2 and a TA, for example an RS-232- serial interface. • TE2 - TA • S — References the points that connect into the customer switching device NT2and enables calls between the various types of customer premises equipment. • NT2 – TE1, NT2 - TA • T — Electrically identical to the S interface, it references the outbound connection from the NT1 to the ISDN network or NT2. • NT1 – NT2 • U — References the connection between the NT1 and the ISDN network owned by the telephone company. • NT1 – Telephone company NETE0510: Communication Media and Data Communications

  46. ISDN Access Options TE1 TE1 ISDN router TE2 TE1 ISDN router NETE0510: Communication Media and Data Communications

  47. BRI and PRI • BRI • Provides two 64-kbps bearer (B)-channels for the carriage of user data and one 16-kpbs control and network management D-channel • 2B+D = (2x64 + 16) = 144 kbps • Suitable for voice, data, and video (low rate) • PRI • 23 64-kbps bearer (B) channels and one 64-kbps signaling channel (North America) 23B+D (DS1 equivalent) • 30B+D for international (E1 equivalent) • Higher bandwidth or shared customer devices NETE0510: Communication Media and Data Communications

  48. ISDN: BRI NETE0510: Communication Media and Data Communications

  49. ISDN PRI (cont’d) • ISDN PRI provides a single 1.544 Mbps DS1 or a 2.048-Mbps E1 data rate channel over a full-duplex synchronous point-to-point channel using TDM hierarchy • DS1 data stream comprises 24 DS0 channels of 64 kbps each containing 23 B-channels at 64 kbps each and one D-channel at 64 kbps NETE0510: Communication Media and Data Communications

  50. ISDN: PRI NETE0510: Communication Media and Data Communications

More Related