1 / 18

Chapter 5

Chapter 5. Functions For All Subtasks. Void functions. Do not return a value. Keyword void is used as the return type in the function prototype to show it returns nothing. Syntax: void Function_Name (Parameter_List) ;. When to use void functions. Output

blithe
Download Presentation

Chapter 5

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 5 Functions For All Subtasks

  2. Void functions • Do not return a value. • Keyword void is used as the return type in the function prototype to show it returns nothing. • Syntax: voidFunction_Name(Parameter_List);

  3. When to use void functions • Output void show_results (double fDegree, double cDegree) { cout.setf(ios::fixed) cout.setf(ios::showpoint); cout.precision(1); cout <<fDegree<<“ degrees Fahrenheit is equivalent to \n” <<cDegree<<“ degrees Celcius.\n”; return; //optional } • instructions to user(which has no input variables) void instruct () { cout<< “This program computes the volume of a “ <<”right circular cone\n”; return; // This is optional } • when we want to change more than 1 variable (call-by reference)

  4. return Statements in void Functions • Syntax: return; • Is optional • Usually used when need to break out of the function. void UnitPrice (double total, int units) { if (!units) // units == 0 return; cout << “The unit price is ” << total/units << endl; }

  5. Call-by-Reference • When we want to make changes to variables in the caller program inside a function. • Call-by-value sends in a copy of a value stored. It cannot change the value of variable in the caller program. • If we need to make changes to more than 1 value. • A function can only return one value. • We need to be able to go to the memory location and change the value there for a permanent change.

  6. Implementing Call-by-reference • To change the stored value, we need to pass in the address. • Use & to designate “the address of” • & is shown only in function prototype/definition, not in function call. • Must pass in variables so computer knows address and can change. Cannot pass in constants. • Formal Parameters : Placeholders in the function code. These are not declared and don’t represent any memory location. • Arguments: Used in the function call. An actual value or location in memory where a value is stored. This information is passed into the formal parameters in the function code and used in the function computations.

  7. Call-by-reference Example #include <iostream> using namespace std; void swap (int&, int&); // Function prototype int main () { int x, y; // Declare two variables to hold integers cout << "Enter two integers .. seperated by a space: ";// User prompt cin >> x >> y; cout << "The initial values of two numbers: x=" << x << “, y=" << y << “.\n“; swap (x, y); // Function call cout << "The current values of two numbers: x=" << x << “, y=" << y << “.\n“; return 0; // This program requires a return integer value } void swap_values (int& first_num, int& second_num) // header { // body first_num = second_num; second_num = first_num; } 1000 x y first second ? 3 2000 ? 4 The initial values of two numbers: x=3, y=4 ? 1000 x=4, y=4 The current values of two numbers: ? 2000

  8. Call-by-reference Example #include <iostream> using namespace std; void swap (int&, int&); // Function prototypes int main () { int x, y; // Declare two variables to hold integers cout << "Enter two integers .. seperated by a space: ";// User prompt cin >> x >> y; cout << "The initial values of two numbers: x=" << x << “ y=" << y << “.\n“; swap (x, y); // Function call cout << "The current values of two numbers: x=" << x << “ y=" << y << “.\n“; return 0; // This program requires a return integer value } void swap_values (int& first_num, int& second_num) // header { //body int temp = first_num ; first_num = second_num; second_num = temp; }

  9. Mixed parameter lists • We can have both call-by-reference and call-by-value within a function. void SalaryCalculate(float rate, float& salary, int years); • You need to decide whether the function will be changing the data. If it is changing the data, the data MUST be call-by-reference.

  10. Call-by-reference vs. Call-by-value • Call-by-value (IN) • variable information is to be used, not changed • variable is to be temporarily changed • Ex: double SalesTax (double price, double rate) ; • Call-by-reference (OUT) • Variable has no meaningful value goes in and valid value comes out. • Ex: void InputChoice (double& ans); • Call-by-reference (IN/OUT) • Variable has meaningful value but it is to be altered inside function. • Ex: void SalaryCalculate(float rate, float& salary, int years);

  11. Pre and Post conditions • Precondition: What must be true of data before a function is called (requirements). Should be validated before the function is called to avoid erroneous results. • Postcondition: What is true of data after a function is called.

  12. Pre and Post conditions (examples) double ConvertCoins (int number, double coinValue); // Pre-Cond: Get number of coins of 1 type and their value in dollar. // Post-Cond: The total amount of money converted to dollars and returned. int ConvertCoins (int number, int coinValue); // Pre-Cond: Get number of coins of 1 type and their value in cents. // Post-Cond: The total amount of money converted to cents and returned. voidConvertCoins (int number, double coinValue, double& total); // Pre-Cond: Get number of coins of 1 type and their value in dollar. // Post-Cond: The total amount of money converted to dollars. voidConvertCoins (int number, int coinValue, int& total); // Pre-Cond: Get number of coins of 1 type and their value in cents. // Post-Cond: The total amount of money converted to cents.

  13. Testing and Debugging Functions • Create the Structure Chart with data flow to define function interfaces • Drivers: The caller functions calling other functions. • Stubs: Dummy functions. They usually consist of a message saying the function was called. They can return a constant value (if needed).

  14. Structure Chart • Structure Chart represents the Driver program. • Each subtask is a function • Data flow tells what the parameters for the function should be • Data flow tells whether the parameters are passed by value or reference. Main PayOut salary salary PayOut salary salary Get Initial Salary Payment Calculation PayStub Display

  15. Structure Chart • Structure Chart represents the Driver program. • Each subtask is a function • Data flow tells what the parameters for the function should be • Data flow tells whether the parameters are passed by value or reference. Main salary salary salary salary Get Initial Salary Payment Calculation PayStub Display PayOut

  16. Stub Examples void main () // This is real code { double salary, pay; salary = GetSalary (); PaymentCalculate(salary, pay); } double GetSalary () // This is a stub { cout << “Inside GetSalary() \n”; return 1000.0; } void PaymentCalculate (double salary, double& payout) { // This is a stub cout << “Inside PaymentCalculate() \n”; payout = 750.0; PayStubDisplay(salary, payout); } void PayStubDisplay (double salary, double payout) { // This is a stub cout << “Inside PayStubDisplay() \n”; } Output: Inside GetSalary() Inside PaymentCalculate() Inside PayStubDisplay()

  17. Driver Examples void main () // This is a driver { double pay; PaymentCalculate(500, pay); PaymentCalculate(1000, pay); PaymentCalculate(1500, pay); } void PaymentCalculate (double salary, double& payout) // This is real code { if (salary < 1000.0) payout = salary * 0.9; else if (salary >= 1000.0 && salary < 1500.0 ) payout = salary * 0.8; else payout = salary * 0.7; PayStubDisplay (salary, payout); } void PayStubDisplay (double salary, double payout) // This is a stub { cout << “Inside PayStubDisplay() with salary=$” << salary << “ and payout=$” << payout \n”; } Output: Inside PayStubDisplay() with salary=$500 and payout=$450.00 Inside PayStubDisplay() with salary=$1000 and payout=$800.00 Inside PayStubDisplay() with salary=$1500 and payout=$1050.00

  18. General Debugging Techniques • Keep an Open Mind: Don’t assume code is correct/incorrect. • Change only code that you believe to be incorrect. Don’t randomly change things without cause • Show your program to another person to help you debug. Fresh mind has new looks to your program. • Check Common Errors: uninitialized variables Off-by-one-errors Exceed data boundary Automatic type conversion/Integer divide rather than double divide. Using = instead of == • Localize the error: Use cout statements or debugger to trace code behavior.

More Related