1 / 25

TROWEL GRADE

TROWEL GRADE. Trowel Grade is a modified elastomeric asphalt emulsion specifically formulated product where a watertight seal is required. It is suitable for use with building fixtures, pipes, walls and roofs.

becky
Download Presentation

TROWEL GRADE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TROWEL GRADE Trowel Grade is a modified elastomeric asphalt emulsion specifically formulated product where a watertight seal is required. It is suitable for use with building fixtures, pipes, walls and roofs. Trowel Grade is a single component product that may be cold applied be applied by brush or squeegee. The technology employed in Trowel Grade provides a solvent-free, quick setting coating that yield a membrane with excellent strength, elasticity and adhesion. Being an environmentally friendly product Trowel Grade can be applied indoors and outdoors with no special protective equipment.

  2. Performance * ONE COAT SYSTEM * MINIMAL SURFACE PREPARATION * ENVIRONMENTALLY FRIENDLY * NON-TOXIC * CONTAINS NO SOLVENTS * 100% ELONGATION * RESISTANT TO MOST INORGANIC SOLUTIONS * OZONE & UV RESISTANT * CAN WITHSTAND THERMAL CYCLING

  3. Environmental Concerns & Work-safe Practices • Liquid Rubber products are state of the art with respect to today’s environmental concerns and work-safe practices. • The products consist of stable, non-toxic, ordor-less non-flammable liquid components which do not present a storage or transportation hazard prior to, during, or following application. • Fumes associated with hot kettles and propane torches are not involved in application, hence, Liquid Rubber is extremely user-friendly on-site and during application.

  4. Trowel Grade is a modified elastomeric asphalt emulsion specifically formulated product where a watertight seal is required. • It is suitable for use with building fixtures, pipes, walls and roofs. Trowel Grade is a single component product that may be cold applied be applied by brush or squeegee.

  5. The technology employed in Trowel Grade provides a solvent-free, quick setting coating that yield a membrane with excellent strength, elasticity and adhesion. • Being an environmentally friendly product Trowel Grade can be applied indoors and outdoors with no special protective equipment.

  6. APPLICATION • Trowel Grade is water based, environmentally friendly alternative to conventional hot-applied or solvent based waterproofing systems. When cured, it will form a seamless flexible membrane. • Trowel Grade is applied using a trowel or squeegee. Since Trowel Grade cures by evaporation, an application temperature of 15-20°C is recommended. If time allows, apply in thin coats. The product fully cures within 24 hours at 20oC (70oF) and 50% relative humidity, when applied at a thickness of 40 mils (1 mm). Consult with your Liquid Rubber International representative for further details

  7. APPLICATION • Trowel Grade should be applied to a dry surface which is free of dirt, debris, oil or grease. Application is not recommended if heavy rains are imminent, or in high humidity environments. • Trowel Grade is applied between 0.3-06 m2/litre (15-30 ft2/gal) to produce a 40-120 mil (1-3 mm) protective membrane. Typically, Trowel Grade dries to the touch in one minute @20°C. This curing time may vary depending on temperature and relative humidity.

  8. LIMITATIONS • Trowel Grade is mildly alkaline. When applying this product observe normal safety precautions, wear gloves, eye protection and other suitable protective equipment. • For further information please consult the product MSDS. • Trowel Grade should not be applied when the ambient temperature is below 15°C. The uncured membrane may be damaged if frozen. Do not apply to wet surfaces or directly before a rain. Some surface base coat materials such as coal tar are unsuitable for use with Trowel Grade.

  9. CAUTION • Industrial use only. Keep out of the reach of children. Avoid storage below 5°C. • Please consult the Material Safety Data Sheet before using Trowel Grade

  10. Uses • Trowel Grade is used in conjunction with protective coatings to seal fixture, cracks, roof penetrations, pipe pass-through etc. to prevent water, air leaks and corrosion damage. The high viscosity of Trowel Grade allows it to be used to fill crevices or to coat vertical surfaces.

  11. SECTION 1 MATERIAL IDENTIFICATION • TRADE NAME: Trowel Grade • CHEMICAL FAMILY: Water suspension of petroleum derived hydrocarbons (polymer modified emulsifed asphalt) and inert fillers. • MATERIAL USE: Protective Coating • T.D.G. CLASSIFICATION: NON REGULATED • WHIMIS CLASSIFICATION: NON REGULATED

  12. SECTION II HAZARDOUS INGREDIENTS COMPONENT CAS# % (BY MASS) LC50 (ppm) LD50 (mg/kg) (rat inhal) (rat oral) Complex mixture n/a 40-70 n/a n/a of bitumens anionic surfactants n/a 0.5-2.0 n/a n/a water 7732-18-5 30-60 n/a n/a Polymer dispersion 5-25 n/a n/a

  13. SECTION III PHYSICAL PROPERTIES • Odour and appearance: Viscous brown liquid, slight resinous odour. • Odour threshold: n/a • Specific gravity: 1.00 (approx.). • Coefficient of water/oil distribution: n/a • Vapour pressure (mm Hg): 17 @20°C (water) • Boiling point: 100°C (water) • Freezing point: 0°C • pH: 7-13 • Vapour density (air = 1): >1 • Evaporation rate (nBuAcetate = 1): <1 • Volatiles %: 30-40 (water) • Solubility in water: partially soluble

  14. SECTION IV FIRE & EXPLOSION DATA • Means of extinction: n/a • Sensitivity to mechanical impact/static discharge: n/a • Flash point (method): n/a (non-combustible) • Upper flammable limits % : n/a • Lower flammable limits % : n/a • Autoignition temperature: n/a • Special fire fighting instructions: n/a • Unusual fire and explosion hazards: Product will not burn but may splatter if temperature exceeds the boiling point.

  15. SECTION V REACTIVITY DATA • Chemical stability: Stable • Incompatible materials: Will react with alkaline sensitive materials such as acids and certain metals. Contact with reactive metals such as aluminium or magnesium will result in the formation of explosive hydrogen gas. • Hazardous decomposition products: Avoid heating above 200oC. At elevated temperatures hazardous vapours can be released, including carbon monoxide, hydrogen chloride, organic acids and aldehydes. • Hazardous polymerization: Will not occur.

  16. SECTION VI HEALTH INFORMATION • Exposure limit: n/a • Inhalation: n/a • Skin: adhesion • Eyes: adhesion, irritation. • Ingestion: Blockage of digestive and/or respiratory tract. • Chronic effects: n/a

  17. EMERGENCY AND FIRST AID PROCEDURES • Inhalation: n/a • Skin: This is an alkaline product. If splashed on the skin immediately wash thoroughly with fresh water. If the product has dried on the skin massage the area with medical grade mineral oil, baby oil or edible oil, then wash with soap and water. If irritation persists seek medical attention.. • Eyes: Flush thoroughly with fresh water for at least ten minutes. Seek medical attention. • Ingestion: DO NOT INDUCE VOMITING. Seek medical attention.

  18. SECTION VII SPILL PROCEDURES • In the event of a spill: Dike and contain, transfer to containers for recovery or disposal. Keep out of sewers. • Waste disposal method: Follow federal, provincial and local regulations regarding disposal.

  19. SECTION VIII SPECIAL PROTECTION • Respiratory protection: n/a • Ventilation: n/a • Protective gloves: Recommended • Eye protection: safety glasses/splash goggles recommended • Other protective equipment: Long sleeves, loose clothing recommended.

  20. SECTION IX SPECIAL PRECAUTIONS • Storage and handling conditions: Keep containers tightly closed when not in use. KEEP FROM FREEZING. • Special shipping information: Not regulated by the Transportation of Dangerous Goods Regulations

  21. TECHNICAL SERVICE • Call toll free: 1-866-979-0300 • THIS PRODUCT IS NOT SUBJECT TO THE CONTROLLED PRODUCTS REGULATIONS. • Trowel Grade is manufactured exclusively Liquid Rubber Industries

More Related