1 / 19

CR RESR

CR RESR. NESR. EX otic nuclei studied in L ight-ion induced reactions at the NESR storage ring. Key physics issues Matter distributions (halo, skin…) Single-particle structure evolution (magic numbers, shell gaps, spectroscopic factors) NN correlations, clusters

barney
Download Presentation

CR RESR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CR RESR NESR EXotic nuclei studied in Light-ion induced reactions at the NESR storage ring • Key physics issues • Matter distributions (halo, skin…) • Single-particle structure evolution • (magic numbers, shell gaps, • spectroscopic factors) • NN correlations, clusters • New collective modes (different • deformations for p and n, giant • resonances strengths) • Astrophysical r and rp processes • (GT, capture…) • In-medium interactions in asymmetric • and low-density matter • Light-ion scattering • Elastic (p,p), (a,a) … • Inelastic (p,p’), (a,a’) ... • Charge exchange (p,n), (3He,t), (d,2He) … • Quasi-free (p,pn), (p,2p), (p,pa) … • Transfer (p,t), (p,3He), (p,d), (d,p) … ~ 10 … ~ 740 MeV/nucleon

  2. RIB (740 MeV/nucleon) Collector Ring Bunch rotation Fast stochastic cooling NESR Electron cooling Experiments RESR Deceleration (1T/s) to 100 - 400 MeV/nucleon Later stage of FAIR

  3. EXL Set-up – Concept and Design Goals • Design goals • Universality: applicable to a wide class of reactions • High energy and angular resolution • Fully exclusive kinematical measurements • High luminosity (> 1028 cm-2 s-1) • Large solid angle acceptance • UHV compatibility (in part) • Internal gas-jet target (>1014 cm-2) • Detection systems for: • Target recoils (p,a,n,g…) • Forward ejectiles (p,n,g) • Heavy fragments Big R&D effort needed!

  4. Phase I Phase II EXL Recoil & Gamma Array EXL Gamma & Particle Array EXL Silicon Particle Array • Challenging requirements: • High efficiency and universality • High angular and energy resolutions • Low threshold • Large dynamic range • High granularity • Vacuum compatibility • …

  5. Choice of detector types for the baseline scenario of the EXL Recoil & Gamma Array Energy – Position – Identification • Si DSSD • 300 mm thick, spatial resolution • better than 500 mm in x and y, • DE 30 keV (FWHM). • Thin Si DSSD • <100 mm thick, spatial resolution • better than 100 mm in x and y, • DE 30 keV (FWHM). • Si(Li) • 9 mm thick, large area 100x100 mm2, • DE 50 keV (FWHM). • CsI crystals • High efficiency, high resolution, 20 cm • thick. Mass & charge identification Lower thresholds Mass identification • Design study • Thin DSSD • PSD with DSSD • Integrated devices DE-E monolitic • MAPS • Si(Li) • CsI and other crystals • Vacuum chamber Synergy with R3B & NUSTAR.

  6. Characteristics of EGPA (EXL Particle and Gamma Array) • Detect both gs and charged particles • Gamma sum energy, m and individual energies • 95% 4P coverage, e=80% for Eg= 2-4 MeV • Stopping 300 MeV protons • DE = 2-3% for gs and 1% for fast protons • Bins in polar angle of 1o-4o for Doppler Correction • Total of about 1500 crystals of 20 cm in length • 2 Phases : 1.7 + 0.6 M€ if CsI

  7. The MUST2 Array • Compact and efficient: bound and unbound states • g-particle coincidences • Examples : (a,6Be) with cryogenic target • 2-nucleon transfer for pairing studies • 2-proton decay measurements IPNO-GANIL-SACLAY collaboration

  8. 6 mm MATE for Si, Si(Li) & CsI HT  16 ch Amp Slow M U L T I P L E X E R Track Hold PA wide band +/-ve Amp Fast TAC Multiplex Disc LE MATE Slow Control Gain, Disc .. Stop PULSER MUFEE

  9. MATE - Performance 6 mm • 16 Channels (Fast & Slow) • Bipolar (slow & fast) • Slow Control • Energy (Track & Hold) • 1µs/3µs RC-CR • 0.3 - 50/250MeV (1:800) • 25/90 KeV • Time • Disc Leading Edge • TAC (300nsec) • 240 psec jitter • Chip 36mm² • BCMOS 0.8 µ • 16000 transistors • 35 mWatt/channel • Serial output 2 MHz What is New ? - In Nuc. Phys. Env. new - Dynamic Range 1:800 new - Time & Energy new And it’s functioning !

  10. 3 Clean Rooms 3D measuring Machine R&D Detection Group http://ipnweb.in2p3.fr/~rdd Head : Joel Pouthas 5 Engineers 3 Technicians(Mechanics) 2 Technicians (Electronics) 4 Technicians (Assembling Detectors) 1 Secretary (part time) Gaseous Detectors Wire Chambers, MPGD ALICE @ CERN HADES @ GSI Scintillators Photomultipliers G0 & DVCS @ Jefferson Lab P.AUGER Observatory

  11. Mechanics Jefferson Lab.@ Newport News DVCS / CLAS Inner calorimeter (PbWO4) 424 crystals, 160 mm long, APD readout 2002 R&D 2003 Construction of a prototype 2004 (Jan) Prototype test on beam 2004 Final design and construction 2005 (Mar) Experiment PROTOTYPE 100 Crystals

  12. Jefferson Lab.@ Newport News DVCS / CLAS Geant 4 simulation Simulation Electromagnetic Shower 2 GeV electron

  13. Jefferson Lab.@ Newport News DVCS / CLAS

  14. GSI @ Darmsdat PANDA / EMCalorimeter Studies Mechanics Thermal Integration Simulations Geant 4 R&D Prototypes Beginning of studies September 2004

  15. GSI @ Darmsdat PANDA / EMCalorimeter Carbon Cells

  16. GSI @ DarmsdatEXL

  17. A Few Questions to Address • Do we need 2 calorimeters for EXL and R3B? • Why does the EXL calorimeter have 1500 modules and the R3B 10000? • Do we need sum energy for EXL applications? (i.e how important is 4P coverage?) • Is CsI the best material? (see Jürgen Gerl’s talk). Do we need cooling? • Will APDs give sufficient dynamic range, or do we need PMTs? • Does EGPA need vacuum? • ….

  18. How can we (IPNO) help answer • Produce a first complete realistic mechanical design. Engineering time will be available starting october. • Do detailed Géant 4 simulations of some specific experimental situations (A post doc, Flore Skaza, has been hired for one year and will start in sept.) • Do studies on materials? • We are willing to contribute to both EXL and R3B. • We need to co-ordinate with other groups and labs.

More Related