1 / 21

Synthesizing a Time History to Satisfy a Power Spectral Density using Random Vibration

Unit 14. Synthesizing a Time History to Satisfy a Power Spectral Density using Random Vibration. Synthesis Purposes. A time history can be synthesized to satisfy a PSD A PSD does not have a unique time history because the PSD discards phase angle

Download Presentation

Synthesizing a Time History to Satisfy a Power Spectral Density using Random Vibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Unit 14 Synthesizing a Time History to Satisfy a Power Spectral Density using Random Vibration

  2. Synthesis Purposes • A time history can be synthesized to satisfy a PSD • A PSD does not have a unique time history because the PSD discards phase angle • Vibration control computers do this for the purpose of shaker table tests • The synthesized time history can also be used for a modal transient analysis in a finite element model • This is useful for stress and fatigue calculations

  3. Random Vibration Test The Control Computer synthesizes a time history to satisfy a PSD specification.

  4. Synthesis Steps

  5. NAVMAT P-9492 PSD Overall Level = 6.06 GRMS Accel (G^2/Hz) Frequency (Hz)

  6. Time History Synthesis • vibrationdata > PSD Analysis > Acceleration PSD Time History Synthesis • Input file: navmat_spec.psd • Duration = 60 sec • sps = 16384, df = 2.44 Hz, dof = 292 • Save Acceleration time history as: input_th.txt • Save Acceleration PSD as: input_psd.txt

  7. Base Input Array: input_th.txt

  8. Base Input

  9. Base Input Array: input_psd.txt

  10. SDOF System Subject to Base Excitation NESC Academy The natural frequency is Example: fn = 200 Hz, Q=10

  11. Acceleration Response (G) max = 45.94 min = -47.21 crest factor = 4.232 mean = 5.331e-05 std dev = 11.16 rms = 11.16 skewness = -0.000856 kurtosis = 3.01 The theoretical crest factor from the Rayleigh distribution = 4.47 Array: response_th.txt

  12. Response fn=200, Q=10 The response is narrowband random. There are approximately 50 positive peaks over the 0.25 second duration, corresponding to 200 Hz.

  13. Response fn=200, Q=10

  14. SDOF Response fn=200 Hz Q=10 Rayleigh Distribution

  15. Response fn=200, Q=10 Array: response_psd.txt Peak is ~ 100 x Input at 200 Hz. Q^2 =100. Only works for SDOF system response. sps = 16384, df = 2.44 Hz, dof = 292

  16. Response fn=200, Q=10

  17. Array: trans.txt

  18. Half-power Bandwidth Points (-3 dB) • f = (208-188) Hz • = 20 Hz • Viscous Damping Ratio • = f / (2 f ) • = 20/ (2*200) • = 0.05 • Q = 1 / ( 2 * 0.05 ) • Q = 10 x: 188 y: 49 x: 208 y: 49 3 dB Bandwidth  20 Hz

  19. Half Power Bandwidth & Curve-fit Q = fn / Δf fn = natural frequency Δf = frequency bandwidth for -3 dB points Q = 200 Hz / 20 Hz = 10 Now perform a curve-fit using the parameters shown on the next slide.

  20. fn = 200 Hz damping ratio = 0.0503 Q = 9.94

More Related