How to Identify the Right Earth Pit for Your Earthing Requirement.docx

1. How to Identify the Right Earth Pit for Your Earthing Requirement? Earthing is the process of connecting metallic parts and equipment that cannot carry current under some normal conditions using an earth pit. The method uses earth electrodes for the connection. This process can also include specific frames of different electrical equipment supports, enclosures, and brackets for the procedure. One such example is body earthing, where Rebar clamps are used to earth the entire rebar structure of any building. At the time of any fault, extremely high current flows through the entire system. Due to that, there is a potential difference created between the ground and the system’s external metallic parts. As a result, if any person comes in contact with the current produced in the system, it would flow through them, thus causing a shock. Hence, certain metallic parts that are non- current carrying connect to the earth to regulate the flow of fault current into the ground properly. In such cases, earth pits help secure the electrodes and the conductor. Choosing the right earth pit is essential to ensure that the earthing process works properly. How to Choose the Correct Earth Pit? An earth pit is a pit where the connection is made between the electrodes used in the earthing process and the conductor connected to the electrical installation. To make sure that earthing works properly, one needs to find the right earth pit. Certain things should be kept in mind when it comes to selecting the earth pit to fulfill the earthing process requirement. Gravel chalk, granite, dry sand, and limestone are specific grounds that should be completely avoided when selecting the earth pit location. Such stony grounds aren’t suitable for the construction of the pit. You need to pick a particular site that is not naturally well-drained. If the soil is made of gravel or sand, one must select a water-logged location. However, there isn’t any use in increasing the moisture content above 15% to 20% in general. One needs to take special care to avoid selecting a particular location kept moist by water flowing over it. For example, land kept moist by a stream of water shouldn’t be considered an ideal site for constructing an earth pit. Another one of the essential things that one needs to keep in mind when selecting the earth pit would be the earth resistance. Now, what is the earth resistance? The earth resistance of any earth pit will depend on the pit creation terrain. According to the resistivity of the soil in any particular location, you can determine the number of earth pits. Hence, it is essential to consider when choosing the earth pit. Conclusion This article above notifies you about selecting theearth pit for your earthing requirement. Make sure to consider all the essential factors to make the right choice.

2. About the Company Axis is the leading Indian Manufacturer & Exporter of a wide range of Electrical Components used in Electrical Installations and in the Equipment Building industry. Their main customer base consists of Distributors/Wholesalers of Electrical Products, Electrical Contractors & Installers, Equipment Manufacturers, Maintenance Companies and Government Authorities.