1 / 8

Reasons Why Servo Motors Fail and How to

Servo Motor Repair for Siemens, Rexroth, Fanuc. Automat provides AC servo motor, brush type, or brushless DC servo motor repair by our specialist with warranty.

automat1
Download Presentation

Reasons Why Servo Motors Fail and How to

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Reasons Why Servo Motors Fail and How to Avoid Them

  2. Servo motors, often known as AC synchronous motors, are versatile solutions for machine makers. They combine remarkable energy economy and compact size to provide up to 60% greater torque than equivalent-sized induction motors. Like any other piece of machinery, servos have flaws that can have an impact on both production and safety. It is essential to comprehend the typical causes of servo motor failure because of this.To learn more Servo motor repair get in touch with us.

  3. Servo motor failure causes and prevention tips Bearing Defect Lack of Brakes Cable and Winding Failures Contaminants Excessive heat

  4. 1. Bearing Defect Numerous variables can contribute to the frequent occurrence of servo motor bearing failure. Bearings naturally deteriorate with time and with use. The incorrect installation or reinstallation of the motor may also cause these bearings to fall out of alignment. An obvious sign of bearing failure is unusual sounds, such as growling or screaming while the engine is running at high speeds.

  5. Servo motor brakes are used to hold a weight in place when the drive is halted or switched off. The majority of servo motor brakes are not meant for dynamic stopping, but merely for holding. If the brake is utilised for numerous e-stops or frequent stops, it could get so worn that it needs to be replaced. To learn more Electrical Panel Cleaning get in touch with us. 2. Lack of Brakes

  6. The most common cause of servo motor failure is a faulty winding. These copper coils inside the motor may deteriorate because of water pollution or more gradually over time as a result of normal vibration as the motor runs. The power, control, or feedback lines in the system can deteriorate over time, much like the motor, which may malfunction or experience voltage spikes that cause it to shut down. 3. Cable and Winding Failures

  7. 4. Contaminants Many of the motor issues we've spoken about thus far have pollution as their primary cause. Despite their general robustness, servos can be badly damaged by some chemicals, including coolant, oil, and even common debris like dirt. The latter can cause overheating by clogging fans and other essential system parts. The motor's windings, encoder, and bearings, among other parts, may be impacted by liquid contaminants.

  8. 5. Excessive heat Overheating is a severe problem for most machinery, including servo motors. An expensive downtime could come from overheating, which could damage components in the motor and other systems. Heat damage in servos is frequently caused by motor obstructions, high ambient temperatures, and extended operation times. Proper ventilation lowers the chance of overheating servos and provides the overworked system enough time to cool down before continuing operation. Contact for more details about ASCO Solenoid Valves.

More Related