Tri Lobe Roots Blowers

1. Swamatics Swamatics World Largest All Type of Industrial Blower Manufacturer. Swam is an International engineering, design and manufacturing company with over four decades of experience, providing the highest quality, positive displacement & centrifugal blowers along with vacuum pump products, for the global market.

2. Tri Lobe Roots Blowers Swamtics, India's leading root blower manufacturer introduces the new Tri lobe root blowers. Tri-lobe technology means that the blowers have the tips of the lobes exposed at 120 degrees around the rotor instead of 180 degrees as in a Bi-lobe blower. This provides a stiffer rotor assembly, which means less deflection under any load. Best process gas blowers, these blowers are designed with specific industry demands in mind for continuous operation, rugged design, reduced noise, reduced pulsation and vibration, longer bearing life, and minimal maintenance. These blowers are designed for continuous duty. Full package units ship with all essential accessories and electric motor, ready to install, plug and play. Tri lobe rotary piston, A Swam Tri-Lobe blower is supplied with integrated safety and monitoring equipment, such as a safety valve and pressure gauge. best process gas blowers manufacturer in india

3. Swamtics, Tri-Lobe Blowers / Compressors are positive displacement units, the pumping capacity of which is determined by size, operating speed and pressure conditions. best process gas boosters, It employs two three-lobe impellers mounted on parallel shafts, rotating in opposite directions within a casing closed at the ends by side plates. As the impellers rotate, air is drawn into one side of the casing and blown out the opposite side against existing pressures. Air Blowers Manufacturer, The differential pressure developed, therefore, depends on the resistance of the connected system. Blowers, being the positive displacement type, do not develop pressure within the housing, but the discharge pressure depends on the resistance / back pressure of the system. Best Air Blowers Manufacturer, Effective sealing of the compressor inlet area from the discharge area is achieved through the use of a very small operating space, eliminating the need for internal lobe lubrication. Pair of precision machined, hardened and ground alloy steel timing gears maintains clearances between impellers during rotation.

4. The air, thus delivered, is 100% OIL FREE. The pumping capacity of a lobe compressor, operating at constant speed, remains relatively independent of variations in inlet and discharge pressure. These blowers are constant volume machines, delivering a fixed discharge against the back pressure of the system. Therefore, it is essential to ensure that minimal restrictions are placed on the piping, inlet and discharge. Properly sized pipes and large radius bends ensure minimal line losses resulting in higher efficiency and low energy consumption. A sudden change in pipe cross section should also be avoided. To change the capacity, it is necessary to change the speed or vent some of the air to the atmosphere. best process gas boosters manufacturer in india Air should not be recirculated from discharge to suction as it may cause the triple lube fan to overheat. Never attempt to control compressor capacity by means of butterfly valves in the inlet or discharge piping. Condenser exhausters, This increases the power load on the engine and can seriously damage the compressor. There is an increase in the discharge air temperature due to the heat of compression. vacuum pump manufacturer.

5. Features • Anti-friction bearings • Three-lobe rotor design, suitable for both pressure service and vacuum service • Fail-safe labyrinth seal • Splash-lubricated, hardened and ground alloy steel timing gears • Improved volumetric efficiency and reduced operating temperatures • Dynamically balanced rotor shaft assembly • Low-noise, low-pulsation three-lobe blower construction

6. Features • Extended shaft design for cold operation • Rigid one-piece IC housing and end plates • Large inlet and outlet connections for minimal loss • Hardened alloy steel shafts ground to close tolerances • 100% oil-free air delivery, Turbo Blowers • Superior product designed and guaranteed from the factory • Standard Orientation - Right Angle Flow

7. Swam’s vision • Swam vision is to provide globally the best-manufactured products. Its focus is on meeting our customers’ requirements while being competitive. Swam sees itself as being recognised as a world leader, providing high-quality robust products.

8. About Us Swam continues to grow year on year. Our focus is growth through: - Integrity. High Quality. Reliability. Innovation. World best practices. Maintaining the highest international standards. Swam is very proud of its history and achievements, our constant desire to be the best Company we can be. Swam Pneumatics, has continued to grow. From its humble beginnings to an international supplier of high quality products. Part of its success is due to the inherited nature to continually improve in every aspect of its business.

9. Contact Us • Address: C-2,SECTOR-3, NOIDA-201301,(U.P.) INDIA. • Phone: +91-120 - 469 6222, +91-120 - 2527610, 2537282 • Fax: +91-120 - 244 3282 • Email: sales@swamatics.com