Introduction To Engineering Multi-view Drawings - 3

# Introduction To Engineering Multi-view Drawings - 3

## Introduction To Engineering Multi-view Drawings - 3

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
##### Presentation Transcript

1. Introduction To Engineering Multi-view Drawings - 3 Agenda 2 View Drawings 3 View Drawings

2. Two-View Drawings • Some objects can be fully described by two views, look for: • Symmetry or Bodies of rotation Front View Right Side View

3. Other Two-View Examples

4. Other Two-View Examples In Class Example: Do a 2-view drawing of this object

5. Steps in Creating the Three-View Sketch – Example Object • Front View • Right Side View • Top View

6. Steps in Creating the Three-View Sketch– Step 1 Block Three Views 2 Miter Line (45o line) 1 2 1 1 • Transferring dimensions across views.

7. Steps in Creating the Three-View Sketch– Step 2 Lightly Block Major Features

8. Steps in Creating the Three-View Sketch– Step 3 Add Features, Use Miter Line

9. Steps in Creating the Three-View Sketch– Add Final Lines

10. Steps in Creating the Three-View Sketch– Completed Sketch

11. Summary • Multi-view drawing tools • Use of hidden and center lines • Conventions on line intersections • Precedence for line types • Two View Drawings - Multi-view drawings for objects with symmetry • Lettering • Creating a Three-View Sketch • Using the Miter Line to transfer dimensions between views

12. Assignment #7 • Assignment #7: Bertoline, Problem 2.9 • Pg. 59, # (41) • Pg. 59, # (47) • Sketch the top, front, and right side views as well as the isometric on the handouts provided in the assignment packet.