1 / 27

ENGINEERING GEOLOGICAL STUDIES for DAM CONSTRUCTION

ENGINEERING GEOLOGICAL STUDIES for DAM CONSTRUCTION. 1. PRELIMINARY STUDY. Evaluation of the data having at archives of Universities ,......etc Field investigation for limited time ( PRELIMINARY Study) Some maps in small scale, for example 1/25 , 000 or 1/50 , 000

arwen
Download Presentation

ENGINEERING GEOLOGICAL STUDIES for DAM CONSTRUCTION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ENGINEERING GEOLOGICAL STUDIES for DAM CONSTRUCTION

  2. 1. PRELIMINARY STUDY • Evaluation of the data having at archives of Universities,......etc • Field investigation for limited time (PRELIMINARYStudy) • Some maps in small scale, for example 1/25,000 or 1/50,000 • Some hydraulic data about • Basin • Precipitation area • Runoff, maximum discharge {Q=R/t (m3/s)} • Some approach to the reservoir area, dam site and type of dam and height of dam...etc • Photogeological studies • A preliminary report

  3. 2. PRELIMINARY STUDIES at the RESERVOIR AREA and DAM SITE • Dam site investigations 1. Location of dam axis 2. Location of diversion tunnel 3. Location of spillway 4. Location of powerhouse...etc • Geological studies • Underground investigations 1. Boreholes • Investigation galleries 4. Surveying for materials 1. Field surveying 2. Laboratory tests

  4. 5.Slope stability investigations 6. Earthquake hazard & risk analysis 7. Environmental studies 8. Leakage possibilities from reservoir area 9. Leakage possibilities from dam site 10. Erosion, sedimentation & siltation

  5. FACTORS AFFECTING to the DAM TYPE SELECTION • Topography • Geology • Bearing capacity of the underlying soil • Foundation settlements • Permeability of the foundation soil • Material availability • Spillway position • Earthquakes • Safety • Height • Aesthetic view • Qualified labour • Cost

  6. FACTORS AFFECTING the PLACE of the DAM AXIS • Topography • Geology • Materials • Spillway location availability • Sediments in the flowing water • Water quality • Expropriation costs • Earthquake possibility • Downstream water rights

  7. ENVIRONMENTAL IMPACTS OF DAMS

  8. ENVIRONMENTAL IMPACTS of CONSTRUCTION PHASE of DAMS • River pollution • Erosion • Loss of aesthetic view • Air pollution • Noise pollution • Dust

  9. ENVIRONMENTAL IMPACTS of RESERVOIRS • Loss of land • Habitat Destruction : • The area that is covered by the reservoir is destroyed, killing whatever habitat existed there beforehand. • Loss of archeological and histrorical places • Loss of special geological formations • Aesthetic view reduction • Sedimentation • Change in river flow regime and flood effects • Reservoir induced seismicity • Change in climate and plant species

  10. EFFECTS of DAMS onWATER QUALITY • Change in temperature • Turbidity • Dissolved gases in the water • Water discharged from the spillway contains 110-120% saturated nitrogen. This amount may be destructive for fish life. • Eutrophication • It means increase in vegetation. If plants exist in water, quality of that water gets worse.

  11. SOME DAMS from SPACE

  12. CONCRETE GRAVITY DAMS

  13. CONCRETE GRAVITY DAMS A concrete gravity dam is the solid concrete structure, which is designed, and shaped so that its weight is sufficient to ensure stability against the effects of all imposed forces. If the dam is properly designed, a solid concrete dam will require little maintenance. Gravity dams are classified with reference to their height. Dams up to 100 feet high are generally considered as low dams, dams from 100 to 300 feet high are classified as medium-height dams, and dams over 300 feet high as high dams.

  14. SELECTION OF DAM SITE Various considerations which taken into selection of gravity dam are: • A narrow gorge, opening upstream, at the dam site. • Strong rock foundation to safely withstand static and dynamic forces including earthquakes. • Strong and watertight abutments. • Stable side slopes of abutments. • Suitable location for power house and spillway • Availability of construction materials nearby. • Accessibility by rail and road. • Availability of electric supply for construction.

  15. FORCES ACTING ON DAM (i) Dead load. (ii) Reservoir and tail water loads. (iii) Uplift pressure. (iv) Earthquake forces. (v) Earth and silt pressures. (vi) Wind pressure. (vii) Ice pressure. (viii) Wave Pressure (ix) Foundation Reaction

  16. Dead Load It comprises the major resisting force. It includes weight of the con­crete or masonry or both plus that of appurtenances such as weight of gates and bridges. Reservoir and Tail Water Loads

  17. Earthquake Forces The earthquake causes acceleration to the foundation of the dam. The acceleration is • Horizontal acceleration • The horizontal seismic coefficient is taken as 0.03 to 0.24 at the top of the dam reduced linearly to zero at the base. Horizontal acceleration equals to 0.1 g to 0.15 g is sufficient for high dams in seismic zones. • Horizontal acceleration causes inertia force and hydrodynamic pressure. • Inertia forces • Inertia force =  W • Where, • W = weight of dam • g = acceleration due to gravity •  =earthquake intensity (acce. Coeff.)= earthquake acceleration/gravity acc.

  18. Hydrodynamic forces Pe = C  W h Where, w = unit weight of water h = total depth of reservoir (reservoir level-base level of dam) y = the vertical distance from reservoir surface to elevation in question, Cm = maximum value of pressure coefficien Moment of this force about the center of gravity of section, at a depth y from the water surface is given by M= 0.299 Pe y2 (Kg m/m)

  19. Vertical acceleration • Vertical acceleration may act either downward or upwards. • Acting downward. When acceleration is acting downward, the foundation tends to move downward from the body of the dam, thereby reducing the effective weight and stability of the dam. It represents worst condition for design purposes. Reduced weight of dam material = Wc (1-) Reduced weight of water = W (1-) Acting upwards. When the acceleration is acting vertical it tends to lift the foundation upwards, i.e. closer towards the dam body thereby increasing effective weight of dam and the stress is increased. Increased weight of dam material = Wc (1+) Increased weight of water = W (1+)

  20. Earth and Silt Pressures Earth pressureshave a minor effect on the stability of the dam and are ignored. Silt gets deposited against the upstream face of the dam. The horizontal silt and water pressure is assumed to be equivalent to that of a fluid weighing 1360 kg/m3. Vertical silt and water determined as if silt and water together have a density of 1925 kg/m3. Wind Pressure Wind loads on dams are ignored. However, if considered, wind pressure is taken as 100 to 150 Kg/m2 for the dam area exposed to wind. Ice Pressure Ice pressure is taken as 25000 Kg/m2 for the dam area contact with ice.

  21. Wave Pressure total wave force (Pw) Pw = 2 hw2 ton/m acting at 0.375 hw above reservoir level Where, hw = wave height (m) F = fetch of reservoir (km) V = wind velocity on water surface (km/hr)

More Related