1 / 28

Computing Suspended-Sediment Concentrations and Loads from In-Stream Turbidity and Streamflow Data

Computing Suspended-Sediment Concentrations and Loads from In-Stream Turbidity and Streamflow Data. Heather Bragg Oregon Water Science Center USGS Sediment Data Collection Techniques March 24-28,2014. PURPOSE. Provide overview

armine
Download Presentation

Computing Suspended-Sediment Concentrations and Loads from In-Stream Turbidity and Streamflow Data

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Computing Suspended-Sediment Concentrations and Loads from In-Stream Turbidity and Streamflow Data Heather Bragg Oregon Water Science Center USGS Sediment Data Collection Techniques March 24-28,2014

  2. PURPOSE • Provide overview • Using samples to develop relationship between instream turbidity and SSC • Using continuous turbidity and streamflow record to compute continuous suspended-sediment load

  3. “Computation of Fluvial-Sediment Discharge” • USGS TWRI Book 3, Chapter C3 • Published 1972 • George Porterfield • Established protocols for computing SSQ from Streamflow

  4. “Guidelines and Procedures for Computing Time-Series Suspended-Sediment Concentrations and Loads from In-Stream Turbidity-Sensor and Streamflow Data” • USGS Techniques and Methods Book 3, Chapter C4 • Published June 2009 • Patrick Rasmussen, KS WSC; John Gray, OSW; Doug Glysson, OWQ; Andy Ziegler, KS WSC

  5. Method Comparison “Traditional” • Collect daily samples • Based on streamflow • Produces daily sediment load record • Time lag for approved record “Regression” • Fewer samples • Surrogate (Turbidity) • Produces high-frequency record • Real-time conditional record

  6. Turbidity-SSC Guidelines PROCEDURE • Compile model calibration data set • Develop regression model • Compute suspended-sediment concentration and load

  7. Turbidity-SSC Guidelines • Compile model calibration data set • SSC data • Depth-integrated, cross-sectional samples (EDI, EWI) • Corrected samples (Point or Single vertical) • Use composite (EWI) or average (EDI) SSC value for model • Collect samples over full range of hydrologic conditions

  8. Turbidity-SSC Guidelines • Compile model calibration data set • Turbidity data • Fixed, instream sensor (Wagner and others, 2006) • Use average turbidity covering duration of sample collection time (before, during, after) for model

  9. Turbidity-SSC Guidelines • Compile model calibration data set • Streamflow data • Use interpolated value at mean sample time

  10. Turbidity-SSC Guidelines • Compile model calibration data set

  11. Turbidity-SSC Guidelines • Develop regression model • Plot data

  12. Turbidity-SSC Guidelines • Develop regression model • Plot data

  13. Turbidity-SSC Guidelines • Develop regression model • Identify outliers

  14. Turbidity-SSC Guidelines Model calibration data set

  15. Turbidity-SSC Guidelines • Develop regression model • Log-10 transformation

  16. Turbidity-SSC Guidelines • Develop regression model • Ordinary least-squares regression analysis

  17. Turbidity-SSC Guidelines • Develop regression model • Ordinary least-squares regression analysis

  18. Turbidity-SSC Guidelines • Develop regression model • Evaluate regression model LOG10SSC = 1.12 LOG10 Turbidity + 0.195 • Bias-correction factor = 1.01 • R2 = 0.993 • RMSE (%) = + 19.7 / - 16.5 • If model is not adequate, perform multiple regression analysis with turbidity and streamflow as independent variables and compare to single variable model

  19. Turbidity-SSC Guidelines • Compute SSC and SSL • Convert regression model LOG10SSC = 1.12 LOG10 Turbidity + 0.195 Bias-correction factor = 1.01 SSC = 1.59 * Turbidity 1.12

  20. Turbidity-SSC Guidelines • Compute SSC and SSL • Estimate turbidity and streamflow data • Missing data • Interpolate between recorded values • Correlate with other parameters or nearby monitoring sites • Truncated (“flat-lined”) turbidity data • Correlate with streamflow or nearby monitoring sites • Use logged values

  21. Turbidity-SSC Guidelines • Compute SSC and SSL • Compute unit value SSC SSC = 1.59 * Turbidity 1.12

  22. Turbidity-SSC Guidelines • Compute SSC and SSL • Compute unit value SSQ SSQ = SSC * Q * c

  23. Turbidity-SSC Guidelines • Compute SSC and SSL • Compute Daily SSL SSL = S [SSQ]

  24. Turbidity-SSC Guidelines • Compute SSC and SSL • Plot data

  25. Turbidity-SSC Guidelines • Compute SSC and SSL • Store data • Discrete sample data – QWDATA / SEDLOGIN • Unit value SSC – ADAPS • Daily value SSL – ADAPS * Estimated flags need to be manually entered

  26. Turbidity-SSC Guidelines • Advantages • Continuous turbidity is easily measured • Hysteresis in T-SSC relationship is not as common compared to Q-SSC • Less uncertainty than Q-SSC relationship

  27. Turbidity-SSC Guidelines • Limitations • Each regression model is site-specific • Turbidity values from different sensors not equivalent • Truncated turbidity at high-end values

  28. Turbidity-SSC Guidelines http://pubs.usgs.gov/tm/tm3c4/ http://water.usgs.gov/osw/suspended_sediment/time_series.html

More Related