1 / 16

Luis A. Agudo Fernández

AFTHAP CONFERENCE www.afthap.com. REINFORCED AND PRESTRESSED CONCRETE PIPE, STEEL CYLINDER TYPE. Module 4: Significant features Final Summary. Luis A. Agudo Fernández. Reinforced concrete steel cylider type experiences since 1984. Experience of AFTHAP.

Download Presentation

Luis A. Agudo Fernández

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AFTHAP CONFERENCE www.afthap.com REINFORCED AND PRESTRESSED CONCRETE PIPE, STEEL CYLINDER TYPE Module 4: Significant features Final Summary Luis A. Agudo Fernández AFTHAP m4 10.03

  2. Reinforced concrete steel cylider type experiences since 1984 AFTHAP m4 10.03

  3. Experience of AFTHAP • Verifiable references, 4400 km since 1958 • Around 3500 manufactured by AFTHAP associates • They can be reviewed on www.afthap.com AFTHAP m4 10.03

  4. Versatility • Specific manufacturing at the pull of the customer • Adaptability to standard, use, load, installation conditions, environment, and so. AFTHAP m4 10.03

  5. Robustness • Strength to ovalizing strains based on the pipe itself and not on extraordinary fillings • Impact and extreme temperatures strength • Buoyancy almost zero (depending on diameters and thicknesses) AFTHAP m4 10.03

  6. Possibility of using a welded joint • It does not require complicated tests of the weldings, penetrating liquids test is enough • It can bear longitudinal tractions, for examplen in the case of self anchored pieces • There is no limit to the use in pressure or diameter • It admits small bend radius, hard alignments in plan and elevation. AFTHAP m4 10.03

  7. Possibility of using an elastic joint • It allows small movements, differential settlements, earthquake. • Electrical discontinuity. • Really simplified joint, it avoids certified welders and checking the joints on site. • It avoids joint protections on site. • It requires few equipments for the assembly. • Speed of execution, less occupancy time. AFTHAP m4 10.03

  8. Durability • They do not require preservation measures • Steels are passivated with the concrete alcaline pH. • The reduction produced by the alcaline pH prevents the reinforcements oxidation. • Head loss usually decreases with time. The concrete surface remains undisturbed and it almost always, depending on water, produces a layer of thin silt which makes it more slippery. AFTHAP m4 10.03

  9. Strength to transient and/or accidental strains • Very high failure critical pressure for negative pressures – It does not buckle easily • Good fatigue behavior • Good behavior for variable stresses (fluttering pressure variations) • Good strength to handlings during the transport and assembly AFTHAP m4 10.03

  10. Madrid, Plaza de Castilla, reinforced concrete, in use since 1949. Manhole making in (55 years) Passivating Alhama, Murcia, prestressed concrete, in use since 70´s. Manhole making in 2009 (around 40 years) AFTHAP m4 10.03

  11. Influence of roughness • Turbulence production next to the duct wall • Accurate formulas are valid (Darcy, Colebrook) • The Hazen Williams formula that includes a correction factor depending on the diameter is quite rough • In all of them, the roughness factors are in the safe side, because of their experimental determination, between 1939 and 1775, with pipes shorter and rougher than current ones • For big diameters, the pipe capacity is almost the same in any material AFTHAP m4 10.03

  12. Reduction on the head loss in time Madrid, Plaza de Castilla, reinforced concrete, in use since 1949. AFTHAP m4 10.03

  13. Reduction on the head loss in time Alhama, Murcia, prestressed concrete, in use since 70´s. AFTHAP m4 10.03

  14. Sustainability • Lower energy consumption during manufacturing • Non-polluting manufacturing • Very long useful life • Non-polluting residue • Reuse possibility (high and very high strength concretes) • Detailed documentation on www.afthap.com, documentation from the 2005 and 2007 seminar AFTHAP m4 10.03

  15. Standardization • European standards UNE – EN • 639 Common requirements • 641 Reinforced concrete cylinder type • 642 Prestressed concrete cylinder type • 805 Systems and components outside buildings • Instruction of Eduardo Torroja Institute for reinforced or prestressed concrete pipes 2007 • Certification with DIT AFTHAP m4 10.03

  16. Certification by DIT • The development of a Technical Suitability Document (DIT) includes: • The preparation of a detailed manual on manufacturing and use approved by a comission of experts created for this purpose by the certification body. • Tracking with periodical controls • All the documentation is public. The one related to reinforced and prestressed concrete pies, steel cylinder type, can be obtained from www.afthap.com AFTHAP m4 10.03

More Related