1 / 27

Booster Bias Supply Upgrade

Booster Bias Supply Upgrade . April 2, 2014. First prototype was started in December The back half of the supply was totally gutted T ransformer Interphase reactor SCR/heat sink assemblies All water hoses Relocated various chassis and supplies A few need re-wiring

archie
Download Presentation

Booster Bias Supply Upgrade

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Booster Bias Supply Upgrade April 2, 2014

  2. First prototype was started in December • The back half of the supply was totally gutted • Transformer • Interphase reactor • SCR/heat sink assemblies • All water hoses • Relocated various chassis and supplies • A few need re-wiring • Assembled as much as possible to finalize layout • Huge relief when it was verified that everything was going to fit without a major overhaul

  3. Slow going on first supply • Not worked on full time • Many delays with materials and parts • Many discussions and decisions on final layout • High priority on ease of future maintenance • Second gutting for final hole drilling, documenting and installation of plated parts. • Made “doubles” of many parts

  4. Now have two techs from EE Support (80%) • High current copper bus bars • Need 10 of these which are very labor intensive • Flexible copper straps • Need 120 of these • Fairly tedious to assemble, solder and drill • SCR/heat sink assemblies • Need 20 of these

  5. Next bias supply rehab: Much faster! • Layout is finalized and documented. • Have 80% of parts and material on hand • Few more in-house machine shop jobs • Off-the-shelf electrical parts • EE Support techs working on labor intensive assemblies • ~2 month turn-around on next supply • Training full-time worker • Ordering remaining parts • Remaining supplies have solid wall separating front and back, possibly creating a few problems • ~1 month turn-around thereafter

More Related