1 / 14

Z Technology Training Class

Instructor: John Purdy. Z Technology Training Class. Z Technology products Meters, Systems, Demodulators Field Strength Meter Hands on Drive Test System Hands on Field Test. Today’s Agenda. Field Strength Meters R-505C R-506 R-507 Systems S5006GPS S5007GPS DVS5100 DSS5600a

apointer
Download Presentation

Z Technology Training Class

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Instructor: John Purdy Z Technology Training Class

  2. Z Technology products Meters, Systems, Demodulators Field Strength Meter Hands on Drive Test System Hands on Field Test Today’s Agenda

  3. Field Strength Meters R-505C R-506 R-507 Systems S5006GPS S5007GPS DVS5100 DSS5600a DSS5800 Demodulators DM1010 DM101 Antennas Tuned Dipoles Log Periodics Active Monopole Biconical Carry Cases Tripod Calibrated Cables Z Technology Products

  4. Important Features R-505C, R-506, R-507 • 5-1000 MHz Frequency Range • -10 dBuV to +90 dBuv Range • +/- 2 dB Accuracy • Calibrated over Temperature, Signal Level and Frequency • Full Featured Front Panel • RS232 Serial Control Port • Fast Front Panel Frequency/Channel Recall • Direct Readout dBuV, dBm*, dBuV/M* • * Not on R-505c • Battery or AC operated: Rugged, Highly Portable

  5. R-505C, R-506, R-507Differences

  6. RF Measurement Units • dBuV - Meter Default Units • dBm - Common in industry Units • dBuV/M - Antenna Factor included Units

  7. RF Measurement Units cont. • dBm = dBuV - 107 • dBuV/M = dBuV + Antenna Factor(dB)

  8. Signal Level Conversion

  9. Systems with RF Meters • S5006 GPS • R-506 Meter, Laptop, GPS & DriveTest SW in self contained case • S5007 GPS • R-507 Meter, Laptop, GPS & DriveTest SW with spectrum monitor in self contained in case. • DVS5100 • R-507 Meter, Laptop, GPS & DriveTest SW with spectrum monitor, record and plot RF Figures of Merit in self contained case.

  10. Systems with RF Meters and Digital Decoders • DSS5600a • R-507 Meter, COFDM Decoder, Laptop, GPS & DriveTest SW with spectrum monitor, record and plot both RF and COFDM Decoded Figures of Merit in self contained case. • DSS5800 • R-507 Meter, 8VSB Decoder, Laptop, GPS & DriveTest SW with spectrum monitor, record and plot both RF and 8VSB Decoded Figures of Merit in self contained case.

  11. Hands On R-506 • Measure 97.1 MHz - RF Amp Off , Wide Band • Adjust Volume • Measure 162.55 MHz - RF Amp On Narrow Band • Change Audio Detector • Store a user Memory • 91.5 MHz, 93.7 MHz, 103.3 MHz • Change programmed frequencies using Tune Knob • Clear User Memories (F21)

  12. Hands On R-506 • Set display to dBm F14 • Set display back to dBuV F14 • Set display to dBuV/M F12

  13. Hands On R-507 • Start R-507 Spectrum Display Software • Set Meter to Remote mode F93 • display shows “ 1 PORT “ • Change frequency/Channel • Change Span • Change Bandwidth • Exit Software

  14. Hands On S5007GPS • Power up System • Start DriveTest SW • Set Meter to remote mode • Measure • Exit DriveTest • Integrated Mapping - plot tab • Street Map Plot - Microsoft MapPoint • Power Down System

More Related