1 / 3

LED PAR38 at a Glance for Any SGL 6” Recessed Housings

Explore the LED PAR38 specifications, photometrics, and dimmer compatibility. Suitable for indoor and outdoor use, with wet listing and dimmable features. Find out recommended number of lamps for various dimmers.

aolani
Download Presentation

LED PAR38 at a Glance for Any SGL 6” Recessed Housings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LED PAR38 @ a Glance Where to Use • Any SGL 6” recessed housings and trims qualified for 90W PAR38 or higher • Wet listed, can be used outdoor with just a par holders 1 LED

  2. LED PAR38 - Photometrics 2 LED

  3. Dimmer Compatibility – LED PAR38 97317S, 97417S Dimmable down to 5% of light output Recommended Number of Lamps per 600W Dimmer While an LED lamp may draws as few as 18 watts continuously, it could have an in-rush current spike and should therefore be treated as a 115W load when sizing dimmers. The maximum number of lamps that should be used on a typical approved dimmers is as follows. 3 LED

More Related