1 / 29

Acoustic Streaming and System Resonance Effects in High Intensity Swirl Burners

Acoustic Streaming and System Resonance Effects in High Intensity Swirl Burners. Nicholas Syred , Jonathon Lewis, Agustin Valera-Medina, Phil Bowen Cardiff School of Engineering Wales, UK. Aims and Objectives.

annora
Download Presentation

Acoustic Streaming and System Resonance Effects in High Intensity Swirl Burners

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Acoustic Streaming and System Resonance Effects in High Intensity Swirl Burners Nicholas Syred, Jonathon Lewis, Agustin Valera-Medina, Phil Bowen Cardiff School of Engineering Wales, UK

  2. Aims and Objectives We analyse and discuss the main sources of coupling which can occur in swirl burners via experimental results gained over many years and how this can interact and modify the combustion aerodynamics of the system. We start by considering the well known Geometric swirl Number which is then modified by combustion: Sg= Axial flux of Angular Momentum Re*Axial Flux of Axial Momentum Then with combustion S*=Sg*Tisothermal Tcombustion s* is a function of Φ (ie flame temp.), and location/shape of flame, hence mode of fuel entry/addition, diffusion, partially premixed and fully premixed.

  3. C A B 3 flames from same swirl burner S=2 (8 slit inlets no fuel gun) A-premixed B-partially premixed via tangential fuel entry C- diffusion fuel entry solely through 1 inch orifice in baseplateFuel natural gas- mixture ratio~1.6 in all cases (equiv Ratio~0.67) Note differences in flame shape, heat release rate, hence alteredSwirl Number due to combustion

  4. Effect of Equivalence Ratio on Averaged reversed Axial Velocity in CRZ, S=1.08. Fuel natural gas. Nomenclature, 25-80 refers to 25 l/min diffusive and to 80 l/min premixed. Clearly different modes of fuel entry give different CRZz

  5. Diffusion flames- stable to pressesional influences, ie no PVC Top heavy fuel oil power station swirl burner- rotary cup atomiser Bottom Natural Gas fired 100KW Swirl Burner, Sg=1 Diffusion Fuel entry along axis Note similarities in flame shape and tulip shaped base region. Flames very stable to tangential or precessional disturbances, but can be excited by axial resonancesPVC normally substantially damped. Note high centre line axial velocities can re-excite the PVC into a double system Many pf flames from front wall fired burners are similar to thatfrom heavy fuel oil

  6. Why is axial fuel entry along centre line so stable? Beer et al (C&F Vol 16, p 39, 1971)developed a modifiedRichardson No. to describe the re-laminarizataion or restabilisation of turbulent axial burning (or helium) central jets in a swirling environment Ri*= (1/ρ)(dρ/dr)(W2/r) (dU/dr)2 Ratio of centrifugal force fields and density gradients to the shear forces. Stabilization effects begin when Ri*> 0 Worked well with Beer’s case.

  7. In the case of central fuel injection & high fuel concentration in CRZ region gives high CRZ temps- surrounded by(initially) much lower temperature flow- hence strong +density gradients. Hence initial section of flow stable as Ri* >1. Not so with premixed/partially premixed combustion where highest temps in outer annular shear flow, CRZ recycles cooler burnt products, hence density gradients -ve hence give s–veRi* We shall now show how londitudinal acoustic coupling ¼ wave or helmholtz can completely modify the combustion aerodynamics

  8. Resonance coupling rigTelescopic tube attached to smallswirl burner S~2 and oscillationbehaviour investigated as a function of Φ & tube length. Strong ¼ wave resonant acoustic couplingfound especially around L~110cms and Φ~ 1.5 (equivalence ratio ~0.67 Although axial fuel entry/diffusion combustion stable to precessional perturbations not sofor axial ones- tangential/partial premixing with the PVC in fact damps this oscillation

  9. Presence of PVC withtangential fuel entrydamps longditudinalresonance. Thus PVCdoes not couple with¼ wave resonancesbut attenuates or partially damps them This is the tangential fuelentry case, frequencies virtually same as axial fuel entry. However Amplitudes reduced by ~60%

  10. Flashback Near blowoff Oscillation Frequencies recorded in and around a Proprietory Gas Turbine Swirl Burner in the HPOC Note the almost constant frequency over a very wide range of Fuel flow and hence Φ. Clearly helmholtz resonance

  11. Configurations of 100Kw Swirl Burner used to investigate Combustion Oscillations

  12. a) Rmsamplitude of oscillation as a function of Φ b) Corresponding Maximum Frequencies

  13. Phase locked LDANat. Gas Partiallypremixeda) Axial velocities b) Axial directional Intermittency c) Tangential velocitiesd) Tang. Directional IntermittencyMeasurements takenjust above burner exit

  14. Variation of Swirl Number over an Oscillation Cycle in a rig very similar to that of figure 2a. The rig simulates at small scale a gas turbine combustor. Natural Gas partially premixed combustion

  15. a b left Phase averaged Axial Velocities and right b) Tangential Velocities in the Furnace exhaust

  16. Precession of coherent structures in vortex swirl flows well documented. • Can take several forms including: • Single precessing structures including the vortex core, CRZ, ERZ and the high momentum flow region (HMFR)embedded in the annular shear flow • Double precessing structures-PVC2. Double CRZs also been seen • Combustion induced vortex breakdown (CIVB) - CRZ can jump just past the burner exit to upstream in the burner. Different PVC states then present.Various analytical models have been developed to predict frequency of the PVC (ie. small perturbation analysis) initial excitation mechanism unclear • In the authors experience longditudinal /helmholtz resonances always dominate and stream the flow preferentially. • PVCs can damp longditudinal acoustic waves • Illustrate precession via data showing how precessing wall flames can form -another form of vortex breakdown – Coanda vortex breakdown COVB

  17. b a Generic 28 mm Exhaust swirl Burner b) Detail of the Exhaust Nozzle showing relationship to Base Plate. Note nozzle angle α and step size ΔY

  18. B) Coanda Jet Flow sticks to Plate A) Ordinary Swirl Jet Flow Phase Locked Axial radial Plane Stereo PIV Images of Velocity Contours across exit Plane of Swirl Burner of Figure 9 a. OJF-MS shape. Re~15,500 ΔY/D=0.107 and α=45°. U vel. m/s COVB shape. Re~15,500, ΔY/D=0.000 and α=45°. Total UV velocity in [m/s].

  19. COVB Flat Flame attached to Baseplate. Re~25,000, ΔY/D=0.082 and α=45° Premixed Methane Air Flame T V

  20. A) B) OJF-MS Superimposed Axial velocity contours on top of V_W vectors and B) V-W velocity vectors, respectively. Re~19,000, ΔY/D=0.082 and α=45°. PVC (red) and ERZ (black) encircled. Velocity in [m/s]. Direction of precession clockwise

  21. A) B) COVB A) Superimposed Axial velocity contours on top of V-W vectors and B) V-W velocity vectors, respectively. Re~19,000, ΔY/D=0.082 and α=45°. PTV (black) encircled. Velocity in [m/s].

  22. St v Re for all the experiments. Note Shift in frequencies for ΔY/D=0.082.

  23. Conclusions • Swirl Burner Burner Flows are easily deformable and couple with external disturbances such as acoustic or system instabilities • (ie compressor & turbine surges/instability/stall) • One common form of londitudinal disturbance is that due to acoustic resonances, especially helmholtz and longitudinal acoustic waves. • These swirl flows will readily couple, deform or stream with these disturbances often completely altering the combustion characteristics

  24. Another common form of disturbance is precessional in • nature generating the PVC, precessing CRZs and other • coherent structures. • The exact excitation mechanism is not clear. • Some modes of combustion (ie axial fuel entry and diffusion • combustion) can damp these precessional modes due to • the right +ve density gradients. • However they do not damp the longitudinal oscillations • Strong evidence that presence of PVC type flows can damp longditudinal or helmholtzrsonances, not excite then as • commonly thought

  25. Vortex Amplifier

  26. Pure tang. Flow- bottom of Characteristic. PVC/CRZ type flowPattern but perfectly stable noresonant coupling. Note Sw~7, but PVC frequency muchlower than found in burners S=1

  27. Small Capacity Vortex Amplifier. Operating Characteristic shows Main Flow (Qs) and Control Flow (Qc) as a Function of Pressure Ratio from Tangential Inlet to Exhaust to that from the Radial Inlets to the Exhaust. System Swirl Numbers (Sw) along the characteristic also relate to static pressure curves later

  28. Large Capacity Vortex Amplifier Operating Characteristic . The unstable and oscillatory sections shown

  29. Sw=7.37 Sw=3.8 Sw=0.93 Sw=0.2 Sw=0 Static wall Pressure in Vortex Amplifier from Vortex Chamber into Outlet Diffuser. Note change from Negative to Positive Wall Pressure at Diffuser Throat as Swirl Number changes from 0.93 to 3.73

More Related