1 / 48

The Nuclear Fuel Cycle

The Nuclear Fuel Cycle. Presentation Components of the Fuel Cycle Front End Service Period (conversion of fuel to energy in a reactor) Back end Storage (open cycle) Reprocessing (closed cycle) Alternatives and Economics Proliferation Concerns. The Front End of the Cycle

anja
Download Presentation

The Nuclear Fuel Cycle

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Nuclear Fuel Cycle

  2. Presentation • Components of the Fuel Cycle • Front End • Service Period (conversion of fuel to energy in a reactor) • Back end • Storage (open cycle) • Reprocessing (closed cycle) • Alternatives and Economics • Proliferation Concerns

  3. The Front End of the Cycle For Light Water Reactor Fuel

  4. Uranium • URANIUM is a slightly radioactive metal that occurs throughout the earth's crust. • It is about 500 times more abundant than gold and about as common as tin. • It is present in most rocks and soils as well as in many rivers and in sea water. • Most of the radioactivity associated with uranium in nature is due to other materials derived from it by radioactive decay processes, and which are left behind in mining and milling. • Economically feasible deposits of the ore, pitchblende, U3O8, range from 0.1% to 20% U3O8.

  5. Uranium Mining • Open pit mining is used where deposits are close to the surface • Underground mining is used for deep deposits, typically greater than 120m deep. • Insituleaching (ISL), where oxygenated groundwater is circulated through a very porous ore body to dissolve the uranium and bring it to the surface. ISL may use slightly acidic or alkaline solutions to keep the uranium in solution. The uranium is then recovered from the solution. The decision as to which mining method to use for a particular deposit is governed by the nature of the ore body, safety and economic considerations. In the case of underground uranium mines, special precautions, consisting primarily of increased ventilation, are required to protect against airborne radiation exposure.

  6. Uranium Mine in Niger (Sahara Desert)

  7. Uranium Metallurgy “Yellowcake”

  8. “Yellowcake”

  9. Tailings from Uranium Mining and Milling • More than 200 pounds of byproduct material, tailings, are typically produced for • each pound of uranium. • After extraction of uranium from the ore, the tailings contain much of their • original radioactivity. • Toxic heavy metals, including chromium, lead, molybdenum, and vanadium, are also • present in this byproduct material in low, but significant, concentrations

  10. Uranium Global Resources

  11. Enriching Uranium for Reactor Fuel • Increase the concentration of fissionable U-235 isotope • Enrichment requires a physical process since • U-235 and U-238 have the same chemical properties • Physical processes require gases for separation • Uranium and its oxides are solids • Must convert uranium to UF6 • Enriched UF6 must be converted back to solid • uranium or uranium oxide

  12. or centrifugation

  13. COMURHEX – Pierrelatte, FranceUF4 → UF6

  14. Enrichment • The two method of uranium enrichment are: • Gaseous diffusion (older) • Centrifugation (newer) • Both use small differences in the masses (< 1%) of the U-235F6 and • U-238F6 molecules to increase the concentration of U-235.

  15. F6 F6

  16. Gaseous diffusion plant Paducah, Kentucky Loading uranium hexafluoride containers

  17. Centrifuge Enrichment Feed Feed to Next Stage Depleted exit Enriched exit U238F6 is heavier and collects on the outside walls (Depleted/Tails) U235F6is lighter and collects in the center (enriched)

  18. The gas centrifuge process has three characteristics that make it economically attractive for uranium enrichment: Proven technology: Centrifuge is a proven enrichment process, currently used in several countries. Low operating costs: Its energy requirements are less than 5% of the requirements of a comparably sized gaseous diffusion plant. Modular architecture: The modularity of the centrifuge technology allows for flexible deployment, enabling capacity to be added in increments as demand increases.

  19. Fuel Fabrication • Reactor fuel is generally in the form of ceramic pellets. • These are formed from pressed uranium oxide which is sintered (baked) at a high temperature (over 1400°C). • The pellets are then encased in metal tubes to form fuel rods, which are arranged into a fuel assembly ready for introduction into a reactor.

  20. UF6 Gas to UO2 Powder to Pellets

  21. Fuel Pellets

  22. Nuclear Fuel Assembly Fuel Pellet

  23. Basic Pressurized Water Reactor (PWR) Fuel Rods

  24. Fuel Assemblies are Inserted in Reactor Vessel

  25. Production of plutonium in a nuclear reactor In addition to the fission of U-235 atoms, some U-238 atom absorb neutrons and emit beta particles to become plutonium 92U238 + 0n1 => 94Pu239 + 2(-1β0) U-235 Pu-239 Pu-240 Amount Removal of fuel elements for making weapons Fission of Pu produces about 1/3 energy from the reactor Time in reactor

  26. Back End of the Fuel Cycle (Open vs. Closed Cycles) Closed Cycle Open Cycle

  27. Composition of Spent fuel Rods from a Light Water Reactor Material Initial Fuel Spent Fuel Type of Waste Transuranic elements 0.000 0.065% TRU U-236 0.000 0.46% Pu isotopes 0.000 0.89% TRU Fission products 0.000 0.35% High Level U-235 3.3% 0.08% U-238 96.7% 94.3% TUR = transuranic

  28. Fission products have shorter half-lives and higher activities. Actinides have longer half-lives and lower activities The actinides are the fifteen elements with atomic numbers 89 to 103.

  29. The spent fuel removed from the reactors continues to release heat and is still radioactive. It is, for those reasons, that the fuel is initially stored under water in the spent fuel storage pools.

  30. Spent Fuel Storage Pools

  31. Dry Cask Storage on Reactor Sites

  32. Transport of Spent Fuel

  33. Solidifying high-level waste in borosilicate glass for long term storage in a repository

  34. Reprocessing – Closed Fuel Cycle Recovers of uranium and plutonium from spent fuel Reduces volume and radioactivity of waste France, the UK, Japan, and Russia currently reprocess spent fuel

  35. Mixed Oxide Fuel (MOX) MOX is produced from the output of reprocessing plants and is a mixture of plutonium and uranium oxides with a composition of 3% to 7% PuO2 and the rest UO2. The MOX is then mixed with ordinary LEU uranium-oxide fuel for use in light water reactors. Mixture is 1/3 MOX and 2/3 LEU. By 2001, over 20 power reactors in France were using MOX for one third of their fuel In the US, MOX fuel is being used as a means of disposing of Pu from dismantled nuclear weapons in the US and Russia.

  36. Fuel Reprocessing Plant, Marcoule, France

  37. Relative Costs

  38. Proliferation of Nuclear Materials and Weapons

  39. HEU Pu-239

  40. Iranian Nuclear Complex

  41. Yongbyon Site

  42. Presentation • Background • Components of the Fuel Cycle • Front End • Service Period (conversion of fuel to energy) • Back end • Open (Storage) • Closed (Reprocessing) • Alternatives and Economics • Proliferation Concerns

  43. Three Useful Educational Resources • The Alsos Digital Library for Nuclear Issues • Nuclear Chemistry in the Community • Concept Map for Nuclear Power

  44. Concept Map for Civilian and Military Uses of Nuclear Energy http://www.chemcases.com/nuclear/index2.html#concept

  45. http://alsos.wlu.edu/

  46. http://alsosconceptmap.wlu.edu/nuclearpower/main/index.html

More Related