Download
1 / 5
50 likes | 156 Views
AC90 – IN WORK CS297 NC 1900590 – REV A -[ 478Z0100-11] GAP on JD60 ( 478Z115-7 & 471Z1208-9 & 478Z1508-5 ) & JD 63 ( 478Z115-7 & 471Z1208-9 ) NC 1900590 – REV B – “REV A” condition went away. Now mismatch 471Z1208-9 & 473Z5100-3 (skin)
E N D
AC90 – IN WORK CS297 NC 1900590 – REV A -[478Z0100-11] GAP on JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) & JD 63 (478Z115-7 & 471Z1208-9) NC 1900590 – REV B – “REV A” condition went away. Now mismatch 471Z1208-9 & 473Z5100-3 (skin) [470Z1008-5] JD1.662, JD39.175, JD40.664 NC 1900590 – REV C – “REV B” Superseded. Measure Gap between 478Z115-7 & 471Z1208-9 Measure Gap between 471Z1208-9 & 473Z5100-3 (skin) NC 1900590 – REV D – Disassemble 478Z115-7 & 471Z1208-9 & 478Z1508-5 & 478Z1508-1 NC 1900590 – REV E – Re assemble.
AC91 – IN WORK CS297 NC 1918046 – REV A – Riding – 471Z1208-9 & 478Z1508-5 ER 2006757 -478Z1508-5 PU 2007004 – FOD between shim and 478Z1508-5 NC 2007045 - AC92 – No NC’s. Work Completed on CS260. AC93 – Work Completed on CS297 NC 2008471 REV A- JD58 Oblong Hole (478Z115-7 & 478Z1508-5) NC 2008581 REV A- Misaligned Holes JD62(478Z115-7 & 478Z1508-1) JD 63(478Z115-7 & 471Z1208-9 & 478Z1508-1) JD 64 (471Z1208-9 & 471Z1108-3 & 478Z1508-1 JD 65(471Z1108-3 & 478Z1508-1) NC 2008581 REV B – Obtaining synthetic part
AC94 – IN WORK CS297 NC 1955827 – REV A- GAP 471Z1208-9& 478Z1115-7 NC 1955827 – REV B- “Rev A” Created GAP 60-5, 63-5, 60-4, 63-2 JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) JD 63 (478Z115-7 & 471Z1208-9 & 478Z1508-1) NC 1955827 – REV C- Ream JD60-1 to -5and JD 63-1 to -5 NC 1955827 – REV D- “Rev C” Created Mismatch 478Z1508-5 & 478Z1115-7 JD58-1 thru -5 AC95 –Work Completed on CS280. PU 2008969 – Elongated Hole JD65 (478Z1508-1 & 478Z1508-1 )
AC96 – IDLE AC @ CS295 No NC’s. AC97 – Work Completed on CS280 NC 2034029 Rev A- Oversize Hole JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) & JD61 (471Z1108-3 & 471Z1208-9 & 478Z1508-5) AC98 –Work Completed on CS280. NC 2009540 REV A- GAP JD58 (478Z115-7 & 478Z1508-5) NC 2009540 REV B – “REV A” Condition no longer exist. AC99 – No NC’s. Work Completed on CS260.
AC100 – IDLE AC @ CS280 as of 10/19 NC 2060297 Rev A – Elongated Holes JD60 (478Z115-7 & 471Z1208-9 & 478Z1508-5) AC101 – IDLE AC @ CS270 as of 10/19 NC 2046928 REV A - [470Z1008-5] JD39.175, JD40.664 Mismatch 471Z1208-9 & 473Z5100-3 (skin) Cancelled, condition did not exist. NC 2052444 REV A- JD65 Hole Angularity 478Z1508-1 & 478Z1508-1 AC102 – No NC’s. Work Completed on CS260.
