630 likes | 734 Views
Welcome to the University LAN Services presentation by R.K. Chandel. This guide provides essential information for setting up and using university LAN services. Key requirements include a computer with a Network Interface Card (NIC) and a valid IP address, obtainable from the LAN Control Room. For optimal connectivity, use a UTP CAT-5 cable not exceeding 100 meters. Troubleshooting tips include adjusting DNS entries and using the Ping command to check network status. Dial-up users can connect to the University RAS for remote access, requiring a username, password, and phone number.
E N D
Welcome to University LAN Services Presented By R. K. Chandel Officer Incharge
New format Email address: user1@hillagric.org University Web Site address: http://www.hillagric.org http://hillagric.org http://210.212.45.100
How to install UNS Service? • User’s computer should have Network Interface Card (NIC) in Windows Operating System environment with UTP CAT-5 cable of maximum length 100 meters from the University LAN Switch/Hub • Valid IP Address is needed for installing UNS Service • Valid IP Address can be obtained by USER-O or USER-R LAN users from LAN Control Room
Additional DNS Enteries If User is facing problems while surfing particular site • He/She can Add/Replace DNS Enteries or its order in own computer
BSNL DNS Enteries • 61.1.128.5 • 61.61.0.5 • 61.0.0.5 • 61.0.0.9
NIC DNS Enteries • 164.100.3.1 • 164.100.17.3
VSNL DNS Enteries • 202.54.15.75 • 202.54.15.30
University DNS Entry • 210.212.45.100
How to check Network setting status? • Use Ping command • FORMAT ping –t <IP address>
Dial-up User • Dial-up User can connect to University RAS (Remote Access Server) having 16 ports • RAS is connected to University EPABX • Dial-up User needs Login Name, Password and EPABX Phone number to dial
Configuration required for Internet Browsing and Email • Internet Explorer • Outlook Express
BASIC NETWORK REQUIREMENT FOR OFFICE NETWORKING