1 / 4

Micro Channel Cooling System Proposal Milestones

This proposal outlines the milestones over three years for developing a micro channel cooling system, including system definition, simulation studies, prototype production, and performance evaluation. These milestones include technology constraints, CO2 refrigeration system setup, and final prototype layout.

alyceh
Download Presentation

Micro Channel Cooling System Proposal Milestones

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Micro channel cooling Milestones proposal

  2. Year 1 • 1) Requirement system definition in operational condition. Technology constraints for DRIE on chip design. • 2) Simulation TFD & TS study: results for a realistic HL-LHC system. • 3) CO2 refrigeration system capable of providing carrier fluid liquid CO2 to feed a test station with saturation temperatures from -30 ° C to +10 ° C with dedicated DAQ system. • 4) Micro channel prototypes for Dp study: single tube (200-500 um), realistic length (300-600 mm). (CO2)

  3. Year 2 • 1) DRIE micro channel technique: design and production of prototypes in FBK/CNM. Cross process compatibility WBS 1. • 2) Optimization of manifold for “a stave”, production of Interconnections parts (Hydraulic & Mechanic & Transmission Infterface Materials) for manifold. • 3) Set-up of Recycling CO2 refrigerator system (TRACI), Tuned for a realistic stave (100W at -30 C). (un esemplare ?) Performance study.

  4. Year 3 • 1) Final Prototype layout after optimization step. Production of parts: cooling channels and interconnections. • 2) Set-up of optimized CO2 refrigerator system • 3) System demonstrator: performance evaluation.

More Related