1 / 9

Exercise 1

Exercise 1. In Fig. 1, run the analysis, and verify that the overall voltage gain Av=V 0 /V s =-25.74, input resistance at V S = 15.44K , output resistance at V o = 9.752K . Fig. 1 CE amplifier with emitter resistor. PSpice BJT Model. PSpice CE amplifier with emitter resistor.

Download Presentation

Exercise 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Exercise 1 • In Fig. 1, run the analysis, and verify that the overall voltage gain Av=V0/Vs=-25.74, input resistance at VS = 15.44K, output resistance at Vo = 9.752K Fig. 1 CE amplifier with emitter resistor

  2. PSpice BJT Model PSpice CE amplifier with emitter resistor

  3. Circuit Description by PSpice

  4. Question • What is the curve of Vo vs Vs when Vs value increases from 0mV to 1mV with 0.01mV.

  5. Exercise 2 • In Fig. 2, run the analysis, and verify that the overall voltage gain Av=V0/Vi=-1.939, output resistance at Vo = 1.95K Fig.2 CS FET with Rs

  6. PSpice FET Model

  7. Circuit Description by PSpice Common-Source FET with RS VI 1 0 1mV G 2 3 1 3 2mS RD 2 3 40K RL 2 0 2K RS 3 0 500 RG 1 2 10MEG .OP .OPT nopage .TF V(2) VI .END

  8. Question • What is the curve of IL vs Vi when Vi value increases from 0mV to 1mV with 0.01mV?

  9. Thinking….. • What is the simulation results when the Fig. 1 and Fig. 2 circuits are using real part for BJT and FET?

More Related