1 / 14

The Effect of Coconut Oil Concentrations on Soap

The Effect of Coconut Oil Concentrations on Soap. Sara Sheridan . Question . How do different concentrations of coconut oil used in the saponification process affect the cleaning abilities of soap?. Background Information . First records of soap were found in Egyptian and Phoenician ruins

alec
Download Presentation

The Effect of Coconut Oil Concentrations on Soap

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Effect of Coconut Oil Concentrations on Soap Sara Sheridan

  2. Question • How do different concentrations of coconut oil used in the saponification process affect the cleaning abilities of soap?

  3. Background Information • First records of soap were found in Egyptian and Phoenician ruins • Soap is used to remove dirt and oils from other solutions and surfaces • Soap: salt of a fatty acid • Saponification: process through which soap is made • Hydrophobic and hydrophilic ends • Soap molecules are essentially fatty acid chains • Purification of soap requires sodium chloride solution

  4. Hypothesis • If three different concentrations of coconut oil are used during saponificationthen the highest concentrated soap will be the most effective and produce the most amount of suds.

  5. Materials • Coconut oil • Sodium hydroxide solution, 3 M • Distilled water • Stirring rod • Supersaturated sodium chloride solution • Cheesecloth • Filter paper • Soap mold • Peppermint oil • (1) 500 mL graduated cylinders • 3 (50) mL graduated cylinders • 3(200) mL graduated cylinders • Beaker tongs • Hot plate • Parafilm • Goggles • Gloves

  6. Procedure (Saponification) • Place 10, 20, 30 mL coconut oil and 15 mL of 3 M sodium hydroxide into a 100-mL beaker • Using a hot plate, heat the mixture to a gentle boil. Stir constantly for twenty minutes. • Wash this crude soap mixture with 15 mL of distilled water and 50 mL of hot saturated sodium chloride (“salting out” the soap). • Break up lumps of soap with a stirring rod • Decant the wash solution by pouring it through the cheesecloth. • Repeat the washing procedure twice. • After the last washing, press the soap between two pieces of filter paper to expel as much water as possible • Add a few drops of peppermint oil, pack it into the soap mold, and let it dry overnight. • Unmold the soap and test its sudsing ability.

  7. Procedure (Sudsing) • Mix .5 grams of each variation of soap with 10 mL of water in a 50 mL graduated cylinder • Cover the graduated cylinder with Parafilm • Shake consistently for 2 minutes straight • Measure volume of suds

  8. Variables • Independent: • Amount of coconut oil in concentrated solutions (10 mL, 20 mL, 30 mL) • Dependent: • Suds produced from shaken soap and water solution (measured in mL) • Constants: • Time coconut oil solution was boiled • Type of coconut oil • Concentration of salt in salt water solution • Boiling times throughout various procedures • Clean tools (beakers, rod, filter papers, cheese cloth, mold) • Amount of water used in sudsing procedure • Control • None used

  9. Variables • Temperature of water during saponification process • Temperature of water during testing process • Consistency of shaking • Purity of coconut oil • Temperature of coconut oil solution • 10 mL of coconut oil did not produce enough soap for sufficient or equal trials

  10. Conclusion • It can be concluded that the soap with the highest concentration of coconut oil produced the most suds. This suggests that the fattier a soap is, the more able it is to dissolve oils and dirt from other solutions. The 30 mL concentration produced the most suds therefore supporting the hypothesis. • The qualitative results also suggest that the more oil in soap, the more easily it dissolves. • To further this experiment, the sodium hydroxide solution could be boiled at different increments and/or the crude soap could be washed more or less times.

  11. Works Cited Addison, Keith. "Glycerine: Journey to Forever." Journey to Forever: Hong Kong to Cape Town Overland - An Adventure in Environment and Development, Join Us on the Internet, All Welcome, Participation, Online Education, School Projects, Free of Charge. Web. 24 Feb. 2011. <http:// journeytoforever.org/biodiesel_glycerin.html>. Bellis, Mary. "The History of Soap and Detergent." Inventors. Web. 24 Feb. 2011. <http://inventors.about.com/library/inventors/blsoap.htm>. Hallenstine, Anne M. "Soap and Saponification - Chemistry." Chemistry - Periodic Table, Chemistry Projects, and Chemistry Homework Help. 2001. Web. 24 Feb. 2011. <http://chemistry.about.com/library/weekly/blsapon.htm>. "Saponification: Soap Making, Old Fashioned Style." ChemLab. 2009. Web. Nov. 2010. <http://chemlab.truman.edu/CHEM100Labs/SAPONIFICATION.pdf>. "Synthesis of Soap." Chemistry. 2008. Web. 24 Feb. 2011. <http:// www.chem.latech.edu/~deddy/chem122m/L06U00Soap122.htm>. Whyte, David B. "The Chemistry of Clean: Make Your Own Soap to Study Soap Synthesis." Science Fair Project Ideas, Answers, & Tools. 2010. Web. 24 Feb. 2011. <http://www.sciencebuddies.org/science-fair-projects/project_ideas/ Chem_p096.shtml>.

  12. Thank You • Questions?

More Related