1 / 14

Tarig A. Ali, PhD Associate Professor, Dept. of Civil Engineering

Robust Extraction of Shoreline by Integrating DubaiSat1 Multispectral Imagery and a Coastal Terrain Model (CTM ). Tarig A. Ali, PhD Associate Professor, Dept. of Civil Engineering American University of Sharjah, UAE. Flow Chart of Technical Approach. Study Area: Al-Ras area, Dubai, UAE.

akio
Download Presentation

Tarig A. Ali, PhD Associate Professor, Dept. of Civil Engineering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Robust Extraction of Shoreline by Integrating DubaiSat1 Multispectral Imagery and a Coastal Terrain Model (CTM) Tarig A. Ali, PhD Associate Professor, Dept. of Civil Engineering American University of Sharjah, UAE Geospatial World Forum - Rotterdam, Netherlands May 13-16, 2013

  2. Flow Chart of Technical Approach

  3. Study Area: Al-Ras area, Dubai, UAE

  4. DubaiSat1 Image of the study area • Multispectral (R, G, B) • Spatial Resolution: 5m • Acquisition date: 12 Nov, 2011 • Image was enhanced by applying a median filter followed by a HPF “basic: -1s and 8”. • Advantages of the median LPF: preserves edges while removing impulse noise and yet help to avoid excessive smoothing.

  5. Surface-Leaving Radiance in the Red Band of DubaiSat1 Image Note the high absorption in the red regionof the electromagnetic spectrum of the Image

  6. Classification of DubaiSat1 image • The Iterative Self-Organizing Data Analysis Technique Algorithm (ISODATA) was used in the classification. Geospatial World Forum - Rotterdam, Netherlands May 13-16, 2013

  7. Classification techniques • ISODATA algorithm takes maximum advantage of spectral variability in an image. • “Iterative Self-Organizing Data Analysis Technique” • Parameters : • N - the maximum number of clusters that you want • T - a convergence threshold and • M - the maximum number of iterations to be performed. Geospatial World Forum - Rotterdam, Netherlands May 13-16, 2013

  8. MS image-derived Shoreline segment

  9. Data used to create the CTM of the study area • The data set comprised of: • 3D bare earth mass points • bathymetric contour data: 10-m interval (surveyed in late September 2011). • LIDAR acquisition date: week of 20 November, 2011 • LiDAR system: Leica LS-50 system integrated with IMU & GPS. • Positional accuracy: RMSE = 0.23-m. • Vertical accuracy: RMSE = 0.10-m in open areas. • Spatial Reference: Dubai Local Transverse Mercator (DLTM) - WGS_84.

  10. Flowchart of Building a CTM using ESRI’s TDS

  11. Costal Terrain Model (CTM) of the study area Spatial Resolution: 10m

  12. Fusion of the MS Image based Shoreline, CTM, and Aerial Image Outcome: Refined shoreline

  13. Concluding Remarks • Extraction of shoreline by fusing DubaiSat1 MS imagery, DTM, and an aerial image was successful . • Issues need further investigation: • Effect of the difference in spatial resolution between the MS image and the DTM • Effect of the vectorization of the shoreline derived from DubaiSat1 MS imagery. Geospatial World Forum - Rotterdam, Netherlands May 13-16, 2013

  14. Thank you

More Related