1 / 4

40 likes | 157 Views

Parameters in Question. amt_strobe_select = 2 (no data clock) all units once at the startup? - Jay, Henk csm_supp_idle_cycle = 1 on all units MROD wants null cycles? - Tiesheng, Henk csm_incl_sync_stat = 1 for diagnostics status bits in the spacer word Should MROD log changes? – Henk

Download Presentation
## Parameters in Question

**An Image/Link below is provided (as is) to download presentation**
Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.
Content is provided to you AS IS for your information and personal use only.
Download presentation by click this link.
While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.
During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

**Parameters in Question**• amt_strobe_select = 2 (no data clock) • all units once at the startup? - Jay, Henk • csm_supp_idle_cycle = 1 on all units • MROD wants null cycles? - Tiesheng, Henk • csm_incl_sync_stat = 1 for diagnostics • status bits in the spacer word • Should MROD log changes? – Henk • csm_ttc_prom = 1 reload TTC – Henk**More Parameters**• gol_use_conf_regs = 0 • a must if no JTAG to GOL chip (default) • csm_gol_ld1 = 0 and csm_gol_ld0 = 0 • selects 5.8ma for the laser diode current • can we use a one value? - Tiesheng, Alberto • csm_gol_pll = 0 to get 10ma pll current? • has any other value been used? - Tiesheng, Alberto**BCR and ECR Timing**• At what time will the BCR be issued • at first trigger -12? – Thilo, Enrico • Should first allowed trigger be BCID=0/1? • Does 0/1 choice impact CSM – Tiesheng • Does 0/1 choice impact MROD - Henk • Revisit, so all know, 2 tick required • separation BCR, ECR, and triggers - Jay • Discuss plans for ECR timing - all • How often in turns & where wrt BCR will it be?

More Related