1 / 4

No Clean flux - Advance Tech

Generally, there are 2 steps required to develop dependable No Clean Flux around joints: a refluxing step and the actual ball-attach procedure. During the refluxing step, there are numerous primary actions that are needed before really putting solder spheres in addition to a flux-coated substrate. <br>Visit us @ https://www.advancetech.co.in/products/interflux/no-clean-flux/if-2005m<br>Mail Us @ ajay@advinancetech.co.in<br>Contact Us @ 9599592692<br><br>

advancetech05
Download Presentation

No Clean flux - Advance Tech

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. no clean flux

  2. Introduction When soldering, you usually need to make use of a flux cleaner to develop appropriate joints. There are many types of flux cleaner, and they can be found in pen, liquid, or spray type, in addition to within the solder wire itself. No-Clean No-clean fluxes are rather weak, and the residue that they leave will normally not hurt your gadgets. This is why they are called no-clean; the residue it establishes can be left on the board and it will not corrode your parts. If you are applying a conformal completing to your PCB then you will require to wipe the residue from no-clean fluxes so you can ensure even protection. Slightly Triggered Rosin Slightly activated rosin fluxes are a bit more effective than No-clean fluxes, however they also typically leave a non-corrosive and non-conductive residue. This flux cleaner varies from manufacturer to maker, so make sure to read the instructions prior to leaving the residue to rest on a delicate aspect. Mildly activated rosin fluxes likewise have a high thermal stability, making sure that preheating does not degrade its solubility.

  3. no clean flux

  4. Contact us Address: 709-710, GD-ITL Towers, B-8, Netaji Subhash Place, Pitampura, New Delhi, India Email: ajay@advinancetech.co.in Phone: 9599592692 Website : https://www.advancetech.co.in/products/interflux/no-clean-flux/if-2005m

More Related