1 / 7

CSC Synchronization Procedure and Plans

CSC Synchronization Procedure and Plans. Updated July 29, 2005 Jay Hauser / David Matlock / Yangheng Zheng University of California, Los Angeles Martin Von der Mey Fermilab. What is done now What should be done. Overview: Step I, without needing L1A.

Download Presentation

CSC Synchronization Procedure and Plans

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CSC Synchronization Procedure and Plans Updated July 29, 2005 Jay Hauser / David Matlock / Yangheng Zheng University of California, Los Angeles Martin Von der Mey Fermilab What is done now What should be done

  2. Overview: Step I, without needing L1A • Make sure to disable interaction between different TMB/DMB setups in one peripheral crate. Allow only 1 chamber to trigger. • Adjust transmit/receive phases on the TMB for CFEB and ALCT within 25ns base period to get proper data transmission between boards. • Adjust ALCT delay to bring it into coincidence with CLCT • Preliminary check of LCT winner bits returned from MPC to TMB. Slice Test at CERN

  3. Overview: Step II: adjusting LCT-to-L1A timing to 2.900 us required by CFEBs • Adjust LCT or L1A delays to get fixed 2.9us between LCT pretriggers and L1As as seen on the CFEBs. Slice Test at CERN

  4. Overview: Step III, with L1A but not DAQ • Adjust ALCT-L1A coincidence to get ALCT to send ALCT readout data block  TMB(passthrough)  DMB • Adjust CLCT/TMB-L1A coincidence to get TMB to send its readout data block  DMB Slice Test at CERN

  5. Overview: Step IV, getting data read out into DMB FIFOs with L1A gating • Adjust delayed CFEB, ALCT, CLCT Data AVailable (DAV) bits to be in coincidence with L1A on the DMB to get data blocks read into DMB memory (FIFO chips). • Find the trigger data in the output record to verify. Slice Test at CERN

  6. Overview: Step V, with L1A and DAQ readout working • Equalize BX numbers between ALCT, TMB, and CFEBs within a chamber for DAQ readout. • For different chambers in the same peripheral crate use TMB output delay registers to equalize LCT times at the SP. • Equalize time of arrival of LCT signals from different crates at SP. Can do this either with TMB output delays or SP input delays. • Equalize BX numbers between chambers in DAQ readout. Slice Test at CERN

  7. Overview: Step VI, only done with LHC Operation • Adjust ALCT fine delay timing (in 2ns steps) to get events in ~1 bx at SP (for synchronous or semi-synchronous beam) • Overall offset to all BX numbers to make them agree with LHC-defined BX numbers. Slice Test at CERN

More Related