1 / 12

Transient Simulations require:

Transient Simulations require:. Initial Conditions. Storage Coefficient. Time step. General 3D equation. Heterogeneous, anisotropic, transient , sink/source term. Specific storage: S s = S/b S is storativity or specific yield. Types of Initial Conditions. Static steady state

adem
Download Presentation

Transient Simulations require:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Transient Simulations require: • Initial Conditions • Storage Coefficient • Time step

  2. General 3D equation Heterogeneous, anisotropic, transient, sink/source term Specific storage: Ss = S/b S is storativity or specific yield

  3. Types of Initial Conditions • Static steady state • Dynamic steady state • Dynamic cyclic conditions • (Time distant conditions)

  4. Problem set 5: part 7.3b Generating cyclic steady state conditions

  5. from GWV Remember: In MODFLOW, a layer is considered “confined” when the head in the cell is above the top of the cell. (If the top layer is specified to be unconfined, it has no top elevation.)

  6. MODFLOW allows for two types • of storage coefficients: • Unconfined storage coefficient (i.e., specific yield) • (used for unconfined layers) • Confined storage coefficient • (used for confined layers) • or you may input specific storage, Ss

  7. A “convertible” layer in MODFLOW (laycon type 3) is one where cells can convert from confined to unconfined conditions. (Conversion back to confined is possible with the re-wetting option but this option doesn’t always work and may give incorrect solutions. Use with caution, or not at all.)

  8. MODFLOW divides time into Stress Periods. There are multiple time steps in a stress period. Initial t Parameters in the following packages can be changed between stress periods: WEL, RCH, RIV, DRN, EVT, GHB Rule of thumb: take at least five time steps per stress period.

  9. MODFLOW divides time into Stress Periods. There are multiple time steps in a stress period. Initial t Rule of thumb: take at least five time steps per stress period.

  10. Selecting the time step Can use: t = Sa2/4T for the initial time step of a stress period or find an appropriate time step by trial and error.

More Related