1 / 10

Forces Inside Earth (43)

Forces Inside Earth (43). Once the elastic limit is passed, the rocks may break When rocks break, they move along surfaces called faults To relieve this stress, the rocks tend to bend, compress, or stretch. If the force is great enough, the rocks will break.

Download Presentation

Forces Inside Earth (43)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Forces Inside Earth (43) • Once the elastic limit is passed, the rocks may break • When rocks break, they move along surfaces called faults • To relieve this stress, the rocks tend to bend, compress, or stretch. • If the force is great enough, the rocks will break.

  2. An earthquake is the vibrations produced by the breaking of rock. • Most earthquakes occur near plate boundaries. • Rocks move past each other along faults, rough surfaces catch, movement stops along the fault

  3. How Earthquakes Occur • Stress causes the rocks to bend and change shape. • Rocks are stressed beyond their elastic limit, they can break, move along the fault, and return to their original shapes. • An earthquake results • http://www.youtube.com/watch?v=VSgB1IWr6O4

  4. Types of Faults • Three types of forces—tension, compression, and shear—act on rocks. • Tension is the force that pulls rocks apart, and compression is the force that squeezes rocks together. • Shear is the force that causes rocks on either side of a fault to slide past each other.

  5. Normal Faults • Along a normal fault, rock above the fault surface moves downward in relation to rock below the fault surface

  6. Reverse Faults • Reverse faults result from compression forces that squeeze rock. • If rock breaks from forces pushing from opposite directions, rock above a reverse fault surface is forced up and over the rock below the fault surface

  7. Strike-Slip Faults • At a strike-slip fault, rocks on either side of the fault are moving past each other without much upward or downward movement. • The San Andreas Fault is the boundary between two of Earth’s plates that are moving sideways past each other. • http://www.youtube.com/watch?v=QPaHJ4rAEtM

  8. Vibrations produced by breaking rock are called __________. • A. earthquakes • B. eruptions • C. faults • D. liquefaction

  9. The type of force that pulls rocks apart is __________. • A. compression • B. shear • C. surface • D. tension

  10. At a __________ fault, rocks on either side of the fault are moving past each other with little upward or downward movement. • A. compression • B. normal • C. reverse • D. strike-slip

More Related