slide1
Download
Skip this Video
Download Presentation
CLX-6240FX & CLX-6200FX series Firmware

Loading in 2 Seconds...

play fullscreen
1 / 41

CLX-6240FX & CLX-6200FX series Firmware - PowerPoint PPT Presentation


  • 295 Views
  • Uploaded on

CLX-6240FX & CLX-6200FX series Firmware. Revision History. V0.1 : 2007.06.20 : Initial Release – Joong Mok Lee Revision : to Now - Won Young Chi. Overview - I. Model CLX-6200ND : DADF, HDD option, wireless LAN option CLX-6200FX : ADF, FAX

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about 'CLX-6240FX & CLX-6200FX series Firmware' - abedi


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
revision history
Revision History
  • V0.1 : 2007.06.20 : Initial Release – Joong Mok Lee
  • Revision : to Now - Won Young Chi
overview i
Overview - I
  • Model
    • CLX-6200ND : DADF, HDD option, wireless LAN option
    • CLX-6200FX : ADF, FAX
    • CLX-6210FX : DADF, FAX, HDD option, wireless LAN option
    • CLX-6240FX : DADF, FAX, HDD, wireless LAN option
  • Print method
    • Single-pass printing (Y->M->C->K)
  • Printing speed
    • CLX-62x0  20/20 ppm (Color/Mono)
    • CLX-6240  20/20 ppm (Color/Mono)
  • Resolution in printing (PC printing)
    • Best mode 1200 x 1200 dpi
    • Normal mode 1200 x 600 dpi
    • Draft mode 600 x 600 dpi
  • Resolution in printing (Copy)
    • Default 600 x 600 dpi
    • Platen photo 1200 x 1200 dpi
  • Duplex mode support
overview ii
Overview - II
  • Memory size (default)
    • CLX-62x0 : 128MBytes
    • CLX-6240 : 256MBytes
  • Panel
    • 2- line LCD panel support
    • Ten key, speed dial support
    • STOP, Start (Color/Mono) Key
  • Supported I/O port
    • USB, Network
  • CRUM
    • C/M/Y/K Toner, PTB
overview iii
Overview - III
  • CPU (CLX-62x0/CLX-6240)
    • Type : CHORUS3/SPGPXm (ARM 920EJ /PMC 7065)
    • Speed : 300MHz/533MHz
    • Bus speed : 120MHz/ 120MHz
    • One chip solution (HPVC, I/O, JBIG, network …)
  • Real-Time OS (CLX-62x0/CLX-6240)
    • pSOS (V2.5) / VxWorks 5.5.1
  • Network configuration
    • Embedded Network
rom image
ROM Image
  • ROM image
  • ROM release
    • Boot image
    • ROM image (except boot image)
f w upgrade
F/W Upgrade
  • USB and Network port are used to F/W upgrade
  • Network applications (SWAS, SWS) can be used for network port upgrade
  • Notice :

In special mode upgrade, kernel waste header information for

CLX-62x0/CLX-6240.

You have to check F/W ROM file with MFP set

(This mode is ONLY service mode, not user mode)

f w upgrade using button
F/W Upgrade – using button
  • F/W Upgrade using USB Port
    • Make sure connecting Printer to the computer with a USB cable
    • Upgrade in Ready mode
      • Send ROM image file via USB cable in Ready mode
    • Upgrade in Special mode
      • Power ON with pressing ‘STOP key’ two times
      • Change LCD message ‘Wait Image’
      • Send ROM image file via USB cable
f w upgrade using sws
F/W Upgrade – using SWS
  • F/W upgrade using SWS(SyncThru Web Service)
    • Home -> Maintenance -> Firmware Upgrade

1

2

3

f w upgrade using swas
F/W Upgrade – using SWAS

1. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Home  Maintenance
f w upgrade using swas1
F/W Upgrade - using SWAS

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Firmware Upgrade  Upgrade (check device using IP address)

1

2

3

f w upgrade using swas2
F/W Upgrade - using SWAS

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Maintenance -> Firmware upload (register firmware)

1

2

3

f w upgrade using swas3
F/W Upgrade - using SWAS

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Maintenance -> Firmware Upload (upload firmware)

1

2

3

4

f w upgrade using swas4
F/W Upgrade - using SWAS

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Maintenance -> Firmware Upload (confirm uploaded firmware)

1

2

3

f w upgrade vi
F/W Upgrade - VI

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Maintenance -> Firmware Upgrade -> Upgrade (choose firmware)

1

2

3

f w upgrade vi1
F/W Upgrade - VI

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Maintenance -> Firmware Upgrade -> Upgrade (choose firmware)

1

2

3

f w upgrade using swas5
F/W Upgrade - using SWAS

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Maintenance -> Firmware Upgrade -> Upgrade

1

2

3

4

f w upgrade using swas6
F/W Upgrade - using SWAS

2. F/W upgrade using SWAS(SyncThru Web Admin Service)

  • Maintenance -> Firmware Upgrade -> Upgrade (Done)

1

2

3

information print
Information print
  • Demo page
    • Press OK Key for 2sec
    • Blinking Green LED (status LED)
  • System Configuration page
    • Menu  System Setup  report  configuration  ‘yes’
    • Blinking Green LED (Status LED)
  • Network Configuration page
    • Menu  System Setup  report  Network Info.  ‘yes’
    • Menu  Network  Network Info.  ‘yes’
    • Blinking Green LED (Status LED)
supplies information
Supplies Information
  • Total Page Count (Color/Mono)
  • Page Count (C/M/Y/K)
  • Fuser Life
  • Toner Remains Percent (C/M/Y/K)
  • Transfer Belt Life
  • Tray1/Tray2 Roller Life
  • MP Roller Life
  • Model ID (C/M/Y/K/PTB)
  • Serial No. (C/M/Y/K/PTB)
  • Product Date (C/M/Y/K/PTB)
  • Last Used Date
  • First Installed Date
  • ADF Scan Page Count
  • Platen Scan Page Count
  • Consumables Information (C/M/Y/K)
status monitor
Status Monitor
  • Display in Status Monitor window
  • Consumables Life Errors
    • Toner Low
    • Toner empty
    • Replace Toner Cartridge
    • Replace transfer belt soon
    • Replace transfer belt
    • Replace fuser soon
    • Replace fuser
    • Replace imaging unit soon
    • Replace imaging unit
    • Replace Pickup (tray1/tray2) roller
  • Need to replace those items when replace error is indicated
consumable unit activity
Consumable Unit Activity
  • Toner Empty Status should be selected option as below:
  • - Color : Stop, Continue, Mono Only
  • Mono : Stop, Continue
  • *Stop  all printing is not allowed.
  • *Continue  all printing is allowed until toner cartridge is exhausted.
  • *Mono Only  color printing data is wasted. Mono printing only allowed.
  • Invalid/Install Toner Status
  • Color/Mono/PTB : all printing operation is not allowed.
  • Exhausted Toner Status (After Empty Status)
  • Color/Mono : all printing operation is not allowed.
slide23
Lily (CLX-62x0)

Part. II Engine F/W

edc mode

EDC Mode
  • Method to enter
      • Power – On the printer, and wait until the “READY” message appearing on LCD Panel.
      • Push button like next time “Menu -> Stop -> Left arrow -> Back -> OK -> Right arrow”
      • “COMPONEMT TEST Press Menu Key”
slide26
EDC Menu

0. Cover Status

slide27
Cont.
  • 1. Sensor Status
slide28
Cont.
  • 2. Motor Test
slide29
Cont.
  • 3. Fan Test
slide30
Cont.
  • 4. Clutch/Sol.
slide31
Cont.
  • 5. Fuser Ctrl
slide32
Cont.
  • 6. LSU Control
slide33
Cont.
  • 7. DEV Control
slide34
Cont.
  • 8. Reset Param

( Take care of this menu because all color regi. data is initialized.)

slide35
Cont.
  • 9. PrintTest
error list and recovery
Error list and recovery
  • Operating Error
    • Paper Jam
      • MP(Tray1, Tray2) Paper Jam0
        • When feed sensor is not checked in limit-time after Pick- up
        • Right Cover Open /Close (check Feed Sensor and Pick-up solenoid)
      • Paper Jam1 Open/Close Door
        • When exit sensor is not checked in limit-time after Feed - In
        • Right Cover Open-> remove the paper-> cover close

(check Feed Sensor , Exit sensor and fuser motor)

      • Paper Jam2 Check Inside
        • When exit sensor is not checked in limit-time after Exit-In
        • Right Cover Open-> remove the paper-> cover close

(check the exit sensor)

      • Duplex Jam0 Check Inside
        • When Feed sensor is not checked in limit-time after Exit-Out
      • Reverse Jam0 Check Inside
        • When rev. Swing sensor is not checked in limit-time after Exit-In
      • Reverse Jam1 Check Inside
        • When rev. Exit sensor is not checked in limit-time after Swing-Out
slide37
Cont.
  • Cover Error
    • Cover Open : Install Transfer Belt message is toggled.
      • When right cover is opened or PTB (Paper Transfer Belt) is not installed
      • Check that PTB is installed
      • Check Right-cover switch, and PTB connector
  • Cassette Out Error
    • Tray1(Tray2) Cassette Out
      • When Tray1- Cassette is out.
      • When tray is dedicated Tray2 in printer – driver and Tray2- Cassette is out.
  • Paper Empty / Paper Mismatch
    • MP(Tray1, Tray2) Paper Empty
      • When dedicated-tray is empty
    • Load A4 In MP(Tray1, Tray2)
      • When paper dedicated in driver is different with paper in tray.
      • Push the ”Stop” key , and documents will be printed continuously
slide38
Cont.
  • Service Call error
    • LSU Motor Error Cycle Power
      • When lock signal of LSU motor is not checked
      • Check LSU and Main board (check Connector)
    • OPC Motor Locked / Deve Motor Locked
      • When lock signal of BLDC motor is not checked
      • Check Motor and Main board (check Connector)
    • Fuser Error
      • Low Heat Error Cycle Power
        • Fuser temperature is not reached at target temperature in limited time.
      • Over Heat Error Cycle Power
        • When Fuser temperature is more than a over- heat temperature
      • ADC Slope Error Cycle Power
        • Fusing Unit is not heated
      • Thermistor Open/Short Cycle Power
        • Thermistor level is not normal
      • Check Thermistor is not connected , Thermistor is dirty , thermostat is opened
slide39
Cont.
  • Outer (Inner) Temp. Error Cycle Power
    • Temp. Sensor- level is not normal
  • When color Regi. is not corrected
    • First , Check Toner-Density
    • Second, Check scratch of PTB.
slide40
Cont.
  • Consumables
    • Install Cyan (Magenta, Yellow, Black) Toner
    • Install Transfer Belt
      • When CRUM Interface is abnormal
      • Extract Consumables from the Printer, and push consumables to the printer again.
    • Invalid Cyan (Magenta, Yellow, Black) Toner
    • Invalid Transfer Belt
      • When CRUM Interface is abnormal
      • Extract Consumables from the Printer, and push consumables to the printer again.
ad