1 / 8

System Commissioning

System Commissioning. System Activation. System activation requires the execution of the following steps: Commissioning Base Station radio parameters configuration SU radio parameters configuration Network Entry SU Authentication with RADIUS Server (Optional)

abbott
Download Presentation

System Commissioning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. System Commissioning

  2. System Activation • System activation requires the execution of the following steps: • Commissioning • Base Station radio parameters configuration • SU radio parameters configuration • Network Entry • SU Authentication with RADIUS Server (Optional) • SU registration with the Base Station • Services provisioning • Defining users operation terms • Allowing users operation, based on predefined service terms

  3. Channel: AU indoor unit (IDU) IF port 4 per AU indoor unit (IDU) 1 outdoor unit (ODU) per channel Cluster: group of AU ODU illuminating same geographical area sector #1 covered area A sector #2 S/W Features Radio Parameters Configuration Definitions cluster A Indoor AU Outdoor Unit #1 Gateway (GW) AU-IDU-4C ch 1 PSTN ch 2 AU Outdoor Unit #2 Gate keeper (GK) cluster B AU Outdoor Unit #3 AU-IDU-4C sector #1 ch 1 covered area B ch 2 AU Outdoor Unit #4 sector #2 Router (R) Internet 100 / 1000 Mbps Ethernet switch AU-IDU-4C ch 1 servers ch 2 SNMP mgr Base Station Shelf

  4. S/W Features Radio Parameters Configuration • The following parameters must be configured in order to establish an air link between AU and SU (Network Entry successfully completed) • Cluster (via NPU) • Radio Cluster ID (1 to 6) • (Radio Cluster) Name • (Radio Cluster) Location • Sector Heading • Sector Beam Width

  5. S/W Features Radio Parameters Configuration • The following parameters must be configured in order to establish an air link between AU and SU (Network Entry successfully completed) • ODU (via NPU) • ODU ID (1 to 24) • Associated Radio Cluster • Configured ODU Frequency Band • TX Power • Admin Status

  6. S/W Features Radio Parameters Configuration • The following parameters must be configured in order to establish an air link between AU and SU (Network Entry successfully completed) • Multi Channel (Per AU via NPU) • Associated ODU • Downlink (TX) Frequency (MHz) • Admin Status • Diversity Mode

  7. System Commissioning Basic (Radio) Parameters Configuration • The following parameters must be configured in order to establish an air link between AU and SU (Network Entry successfully completed) • SU (via SU Ethernet side) • User Name - SU unique name • Password • Base Station ID - Identifier of the base station that the SU is synchronized with • Operator ID • Cell ID • Sector ID • Base Station ID Mask • Bandwidth - signal bandwidth (1.75 MHz/3.5 MHz/5 MHz) • Start Rx Frequency • End RX Frequency • Frequency Main Steps and Intermediate • Select Antenna (0 is external the external antenna)

  8. System Commissioning

More Related