190 likes | 270 Views
The project aims to enhance the needle used in Fine Needle Aspiration (FNA) for increased tissue removal efficiency without altering the procedure significantly. By minimizing patient discomfort and time taken for adequate sample collection, the modified needle will aid in cytological testing. This involves testing with various tissues such as mammary, lymph, and fat for validation and comparison, in search of the ideal prototype for future developments.
E N D
Problem Statement GOAL:To modify the needle used during a Fine Needle Aspiration (FNA) procedure. The modification should not drastically change the FNA procedure and still increase the amount of tissue removed for cytological testing. It should also minimize the time (by collecting an adequate sample size on the first attempt) and discomfort caused to the patient during the procedure.
What is FNA? • Technique used to extract cells; no incision needed • Several insertions are usually required to ensure an adequate sample size • Samples are sent to pathologist to be analyzed National Breast Cancer Center, http://www.NBCC.org
Fine Needle Aspiration (FNA) A.D.A.M., http://www.adam.com
Product Design Specifications • Removes adequate number of cells for diagnosis. • Should not cause more discomfort than current FNA procedure. • Constrained to standard 20-25-gauge needle, client prefers 23-gauge.
Current Prototype • Pre-manufactured drill bit • 6” length • Fits in 23 gauge needle
Tissues Tested • Fixed cat tissues • Mammary • Lymph • Fat
Testing Procedures • Old technique • No insert used • Performed two separate trials on all three tissues • New technique • Drill bit insert used • Performed two separate trials on all three tissues • Observed in saline bath under microscope
Sample Quantification • Old technique • Resulted in either a mass of cells or a minimal quantity of cells • New technique • More dispersed cell sample • Greater number of cells on average
Future Work • Further prototype development • Research into appropriate materials to be used (stainless steel, Co-Cr, Ti) • Develop protocol for quantifying testing • Test on freshly removed tissue • In vivo testing of animal tumors • Cytological evaluation