1 / 2

EN 1092-2 PN16 Blind Flange

A Blind Flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.

Viren4
Download Presentation

EN 1092-2 PN16 Blind Flange

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Stainless Steel Blind Flanges in Mumbai, India A Blind Flange is a plate for covering or closing the end of a pipe. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together. Stainless Steel 304/304L Blind Flange, Stainless Steel 310/310S Blind Flange Supplier, Stainless Steel 317/317L Blind Flanges Exporter, Stainless Steel 316/316H Blind Pipe Flanges in India. Stainless Steel Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings. From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types. A Blind flange is round plate which has all of the relevant boltholes but no center hole, and because of this feature this flange is used to close off the ends of a piping systems and pressure vessel openings. It also permits easy access to the interior of a line or vessel once it has been sealed and must be reopened. However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications. Stainless Steel Blind Flanges are used for testing the flow of gas or liquid through a pipeline or vessel. It helps to close the end of piping systems or vessel openings. It allows easy access to the pipeline when there is a requirement to work done inside the line. They are used in

  2. high pressure applications available in all grades, materials, size and specifications. Blind pipe flanges are typically provided with a raised face, flat face, or RTJ facing. When a raised face is necessary for blind pipe flanges, the standard height is 1/16" for blind pipe flanges under 400 ( 2.4360)#. For blind pipe flanges of 400 ( 2.4360)# and up, the standard blind pipe flange raised face height is 1/4". Standards Specification: ● Size : 1/2" to 48" ● Specifications : ASTM A182 ● Rating: 150#, 300#, 600 (2.4640)#, 900#, 1500#, 2500#, Chemical Composition 304 (1.4301), 304L (1.4307), 304H (1.4948) C Mn Si P S Cr Ni N 304 0.07max 2.0max 0.75max 0.045max 0.03max min: min: — (1.4301) 18.0 8.0 max: max: 20.0 10.5 304L 0.03max 2.0max 0.75max 0.045max 0.03max min: min: 0.10 (1.4307) 18.0 8.0 max max: max: 20.0 12.0 304H min: 0.04 Max: Max:0.75 Max : Max: min: min: - (1.4948) max:0.10 2.0 0.045 0.030 18.0 8.0 max: max: 20.0 10.5 FOR MORE INFORMATION CALL US: +91-9819523999 EMAIL: exports@kobsindia.in VISIT OUR WEBSITE: http://kobsindia.in

More Related