40 likes | 71 Views
Valvesonly Europe is well known Ball Valve Manufacturer in Italy. <br>Description:<br>Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron.<br>Available Size: u00bdu201d to 48u201d<br>Class: 150 to 2500<br>Nominal Pressure: PN10 to PN450<br>Medium: LNG, Cryogenic application, Water, Air, Steam<br>Ends: Flanged, Threaded, Buttweld, Socket weld<br>Operations: Lever Operated, Gear operated, Electric Actuated, and Pneumatic Actuated<br>For more details visit here: https://www.valvesonlyeurope.com/product-category/ball-valve/
E N D
Ball Valve Manufacturer Valvesonly Europe is well known Ball Valve Manufacturer in Italy. A ball valve is a type of flow control valve that uses a ball with a hole through the center to regulate the flow of fluid through a pipe. The ball is mounted inside the valve body, and is connected to an actuator, such as a handle or electric motor, which allows the user to rotate the ball. When the valve is in the fully open position, the hole in the ball is aligned with the flow of fluid, allowing the maximum amount of fluid to pass through the pipe. As the ball is rotated, the hole is no longer aligned with the flow of fluid, which restricts the flow of fluid and can be used to control the flow rate. Valvesonly Europe has been greatest Ball Valve Manufacturer provide a range of ball valves which are used to control the flow of liquids and gases. Ball valves are known for their durability, ease of use, and cost-effectiveness, and are often used in a wide range of applications such as industrial, and commercial. These valves are categorized into different bodies which are: •Three-piece body •Two pieces •Single Body Top Entry •Split Body •Welded The types of Ball Valves are: •Floating Ball Valve •Trunnion Ball Valve •Fully Welded Ball Valve •Top Entry Ball Valve •Jacketed Ball Valve Advantages of Ball Valve: •Provides leakproof service •Open and shut down quickly •They have smaller dimensions •They can be controlled with less force Industries of ball valve: •Oil & gas Industry •Power Industry •Chemical Industry
•Petrochemical Industry •Marine Industry •Mining Industry Parts of ball valve: •Disk •Sleeves •Seat •Stem Ball Design in a Ball Valve: Floating – A floating ball is included in most ball valves. Trunnion – Valves that are of high diameters and with high operating pressure have trunnion designs. Trunnion Ball Valve has a relatively lower operating torque. The hole in the Bore can be- Full Bore Ball Valve Reduced Bore Ball Valve V-shaped Description - Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M, F55, F51, F53, Monel, Ductile Iron. Available Size: ½” to 48” Class: 150 to 2500 Nominal Pressure: PN10 to PN450 Medium: LNG, Cryogenic application, Water, Air, Steam Ends: Flanged, Threaded, Buttweld, Socket weld Operations: Lever Operated, Gear operated, Electric Actuated, and Pneumatic Actuated. For more details visit here: https://www.valvesonlyeurope.com/product-category/ball- valve/
Double Block and Bleed ball Valve Manufacturer Valvesonly Europe is a leading high-quality Double Block and Bleed Ball Valve Manufacturer in Italy. A Double Block and Bleed ball valve is a type of valve that is designed to provide positive isolation between two fluid pathways. The valve has two seats, which are located on either side of the ball, and two seals, which are located on either side of the seats. When the valve is closed, the seats and seals prevent fluid from flowing through the valve, providing a positive isolation between the two fluid pathways. The Double Block and Ball Valve also has a bleed port, which allows for the release of any residual pressure or fluid that may be trapped between the seats and seals when the valve is closed. This feature ensures that the valve is fully closed and that there is no leakage between the two fluid pathways. Valvesonly Europe is the biggest Double Block and Bleed Ball Valve Manufacturer which supplies to whole of Europe, Germany, Italy and it features valve means that it can be used in applications where it is important to completely isolate the two fluid pathways, as the two seats and the bleed port work together to ensure that there is no leakage between the two fluid pathways, even when the valve is closed. Advantages of double block and bleed are: · Compact in design · Reliable & Durable operation
· Seals remain intact even after extended periods of inactivity. · It is useful in fluid shut down & controlling applications that need to avoid losing pressure, such as oil and gas production facilities. Applications of double block and bleed are: •Oil and gas •Chemical processing •Power generation •Water and wastewater treatment Descriptions: Material: WCB, WCC, WC6, LCC, LCB, F55, F51, F53 Available Size: 3” to 24” Class: 150 to 2500 Medium: LNG, Cryogenic application, Water, Air, Steam Ends: Flanged Industries and Medium: Water, Cryogenic application, Steam, LNG, Air For more data, visit us: https://www.valvesonlyeurope.com/product-category/double- block-and-bleed-ball-valve/