3 Tips for Choosing the Best Air-Cooled Industrial Chiller

1. 3 Tips for Choosing the Best Air-Cooled Industrial Chiller The industrial chiller is a cooling system that helps to remove heat from one element and transfers it to the other. The popularity and use of industrial chillers are increasing in many factories and industries. A chiller is a compressor-based cooling system similar to an air conditioner. The only difference between them is that a chiller cools and controls the temperature of liquid instead of the air. It has different components such as a recirculating pump, a temperature controller, and a reservoir. The operation and setup of an industrial chiller are very simple and straightforward. Furthermore, it has many types, and an air-cooled industrial chiller is one of them. How does Air-Cooled Industrial Chiller Work? This type of chiller absorbs heat from processed water and can be transferred to the surrounding air. They are generally used where the additional heat is discharged, thereby cooling them. An air-cooled industrial chiller is more popular and commonly used because it requires less maintenance than other cooling systems. The only drawback of using them is that they consumed 10 percent more power than the other cooling systems. Despite their high power consumption, they are preferred over the other types because of the following benefits: Air-cooled industrial chillers provide portable solutions for all the facilities restricted by space. They are best suited for small-scale and commercial-scale cooling. They are cheaper to install and maintain. If you are planning to buy an air-cooled industrial chiller, read the following tips before choosing the best available model: The first important thing is to know about the performance data of the chiller. The cooling capacity of the industrial chiller is affected by its set-point temperature. It means that there is a direct relationship between the chiller and its cooling capacity. Therefore, decipher the cooling fluid temperature capacity of the chiller to use it in the long run. Always buy your air-cooled industrial chiller according to its operating environment. It would help if you specifically considered the factors such as spatial constraints and ambient temperature before buying it.

2. Last but not least, make sure that you are buying an industrial chiller in the right size. Selecting the right size of the chiller is crucial. An oversized or undersized chiller will be a big problem. Hence, pay attention to the right size. We hope the above-listed buying guide helps you choose the right air-cooled industrial chiller for a long-term power-packed performance!