Remanufactured Engines

1. Remanufactured Engines autotechio.com

2. Remanufactured Engines ● Life cycle of remanufactured engines ● Are remanufactured engines worth it? ● How engines remanufactured? ● Remanufactured engine is good or bad ● Difference in remanufactured and refurbished ● Summary https://autotechio.com/remanufactured-engines/

4. Life Cycle Of Remanufactured Engines Life cycle assessment is a method that is used to assess the life cycle of remanufactured engines. Basically, engine reproducing engineering was investigated on these aspects which were energy, material, and environment. Remanufacturing engines were discussed in detail on the basis of the application of LCA in a practical case. The result shows that remanufacturing of engines can save up to 50-60 kg steels, 8-10 kg of aluminum, and 113 kWh energy power and reduce the emission of 6 kg CO, 3.985 kg SO x, 1 kg NO x, and 288 kg solid waste. The process of remanufacturing engines is practically good and also great for economic value. autotechio.com

5. Are Remanufactured Engines Worth It? If an engine is properly remanufactured, it should be good as a new or better than the original product and it should carry a warranty for six months to one year. If you maintain it very well, you might not have to worry about your car engine for a long time. A remanufactured engine gives you over 100000 miles of support. It is cheaper than a fully rebuilt engine. And even just maintaining the vehicle from time to time servicing and doing some of the work on its own will help keep that mileage up as well. autotechio.com

6. How Engines Remanufactured? ● Remanufacturing is a process in which component of engines are taken apart, cleaned, repaired, and then reassembled. ● Old components of engines must be used, although some of them can be new if the older parts are defective. ● Sometimes engine body gets damaged, but other components are working well then working parts put in the new engine body. ● All material inside the engine like – head and block castings, crankshaft, camshaft and rods - are carefully checked. ● Remanufactured engine restored to as close to new as possible. autotechio.com

7. Remanufactured Engine Is Good Or Bad ● In the sense of comfort remanufactured engine is always good because you feel free after one time of investment. ● The remanufactured engine comes with a limited period warranty that gives you assurance of security. ● Sometimes small parts could be the reason for engine failure in that condition repairing is a good option. ● Remanufactured Engine gives you good mileage, better performance and according to its maintenance, it works long life. autotechio.com

8. Difference In Remanufactured & Refurbished Refurbished Remanufactured Quality like new (or almost new). Quality “like new” or better than original product. Comes with 3-6 months warranty. Comes with 6-12 month warranty. Cost depend on refurbished parts. Cheaper than fully rebuilt engines. Comes with original serial number. Comes with original or new serial number. Aesthetic like new (or almost new). Aesthetic like brand new. autotechio.com

9. Summary Remanufacturing is a process in which components of the engine is taken apart and then according to their condition cleaned, repaired and then reassembled, sometimes defective component replace by the new one. The process of remanufacturing engines is practically good and also good for economic value. In the term of engine remanufacturing, we can save energy, material, and environment. A properly remanufactured engine might be good as a new or better than the original product. It gives you over 100000 miles of support, if you maintain the engine very well then it will help to keep that mileage up as well. autotechio.com