10 likes | 19 Views
An important step on changing our car air filter is about the authenticity of the product being used. We need to make sure that we are using original equipment manufacturers genuine unit as it will keep the warranties and service history perfect.
E N D
This is How You Can Maintain Your Air Filter How to change air filter in caris essential information that a car owner should be aware of. To achieve a good mileage, it is important to have some knowledge on the technical know-how of the vehicle that we are riding. A replacement of car filter in time increases the engine life, improves acceleration, reduces emissions and that helps a car to improve drivability. Car air filter is usually located into an enclosed plastic casing either at right side or center-top of the engine. Most of these casings are closed with a metal clip and can be opened effortlessly with the help of a flat headed screwdriver. Some casing might have screws to open it. As the air filter gets exposed, we need to pull it out. A car air filter generally looks flat and is made of paper elements with rubber edges. An important step on changing our car air filter is about the authenticity of the product being used. We need to make sure that we are using original equipment manufacturers genuine unit as it will keep the warranties and service history perfect. Once we are done with this part, place the filter inside the casing put the clips or the screw back in position. We need to check thoroughly that the clips or the screws have been installed properly and correctly and nothing loose has been left behind inside the casing. How to change cabin air filter is an important knowledge that the user should understand. It is always advisable to check and change the cabin filters in between every fifteen thousand and thirty thousand miles. Otherwise, it starts showing up the sign of low efficiency by reducing air flow when air conditioner or heater is on. Cabin air filters can be replaced within a short time without tools. It may require removing the clasp that hold the glove box or the interior trim panel in its place and change the filter.