4 Questions To Ask For Distinguishing the High Quality led bulb From Cheaper Options

1. 4 Questions To Ask For Distinguishing the High Quality led bulb From Cheaper Options With a significant increase in the demand for LED lights, various manufacturers are flooding the lighting market. You can find the brands at the reputed stores too. But are all these bulbs of premium quality? Certainly not. If you want to buy the best quality led bulb, you have to know how to determine the difference between good quality and poor quality LED lights. A consumer should consider the following four questions for shopping for the right LED lights. Question #1: Will you get consistent color? The LEDs can produce colors on all the ends of the light spectra. But the ideal lighting option for the home or office will be a soft hue of yellow or bright white light. It depends on personal preferences whether you want the white color or other colors. Consistency in color is necessary. Premium brands will always maintain the color temperature over the years, despite the regular use. While shopping, ask for the bulbs that offer color consistency. Question #2: How is the thermal management system? One of the prime reasons to install the LED light is how the bulb manages heat production. LEDs will always emit lesser heat than the typical incandescent or fluorescent lights. But the heat creation is the same. Then how does a good quality bulb manage heat release? The LED bulbs effectively pull the heat for living out the 50,000+ hours lifespan. Best quality Philips light bulbs use the metal heat sinks with the find to pull the heat and store it. But the cheap LEDs use plastic heat sinks and fans to pull away the heat. Such a method will fail in the long run, thus lowering life expectancy. Question #3: What is the direction of light? Conventional incandescent bulbs can emit light through 360 degrees. So you will have shining light even in the places where you don’t need the light. Manufacturers of the LEDs have used chips that shine only in a specific direction. Lenses over the chips aid in widening or narrowing the light beam of LEDs. The light beam spread rating will help you detect whether you get a 10-degree spotlight or a floodlight through 60-degree coverage. Determine your requirement and buy accordingly. Question #4: Can you save money? Investing in the little expensive LED s will ensure that you get maximum energy consumption savings. Check the efficacy measurement that shows the light output from the LED source.

2. LEDs have average efficacy of 60 or even 80, which translates to brighter light production with minimum energy consumption. Buy wisely Being smart homeowners, you should always check the necessary parameres and opt for only the best quality Les if you really want to lower the utility bills and global pollution level.