1 / 13

Thermal Analysis

Thermal Analysis. Thermal Analysis. Thermal Analysis FEA Model Schematic. Thermal Analysis. NICI Cryogenic Requirements Maintain optics and baffling at a temperature that will result in the background seen by the detector, emitted by the optics and baffles, is below 50% of the sky background.

Patman
Download Presentation

Thermal Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thermal Analysis

  2. Thermal Analysis

  3. Thermal AnalysisFEA Model Schematic

  4. Thermal Analysis NICI Cryogenic Requirements • Maintain optics and baffling at a temperature that will result in the background seen by the detector, emitted by the optics and baffles, is below 50% of the sky background. • Maintain the two detectors at the desired operating temperature of 30-35 K to within +- 0.1 K • Have a cooldown time and a warm up time of less than two days. • Use Closed Cycle Coolers

  5. Thermal Analysis Temperature goals • Cold Structure warmest temperature 75 K • Detector operating temperature 30 K • Radiation Shield warmest 150 K

  6. Thermal Analysis Calculated Thermal Loads • Radiation shield 64 watts • Cold Structure 11 watts • Array1 0.518 watts • Array2 0.767 watts

  7. Thermal AnalysisFEA Results

  8. Thermal AnalysisFEA Results

  9. Thermal AnalysisFEA Results • Cold Mass • T min = 67 K • T max = 73 K • Cold Shield • T min = 69 K • T max = 105 K

  10. Thermal AnalysisDetector Cold Straps

  11. Thermal AnalysisDetector Cold Straps

  12. Thermal AnalysisDetector Cold Straps Calculated Detector temperatures • Blue Detector temperature 21.5 K (heater off) • Blue Detector temperature 23 K (heater off) • Expected heater power 1-1.8 watts to achieve detector operating temperature

  13. Thermal Analysis Cooldown Time • Estimated Radiation Shield cooldown time 36 hours • Estimated Filter wheel cooldown 30 hours

More Related