What You Should Know About Fire Safety In Schools

1. What You Should Know About Fire Safety In Schools School fire safety is the precautionary measures taken to prevent or reduce the risk of fire that could end in school death, injury, or property damage. Fire safety measures should be used as soon as the construction of a school begins. Assessments and inspections in schools indicate that non-teaching and residential areas have the highest fire / risk. Non-teaching areas include kitchens, offices, pre-rooms, storage areas, and electrical switch rooms. Schools must abide by a number of school safety rules, and school fire safety is one of the most important requirements of schools. Fire safety equipment, drills and fire safety procedures must be completed at school facilities so that each person knows how to respond calmly and properly in the event of an emergency fire. A school may have substantial fire sprinkler systems and other safety sensors and installed equipment. Some areas of the school have a higher than normal fire risk and special consideration and precautions should be taken in such areas. For example, keep all storage areas clean, waste storage areas and similar areas where combustible materials can be stored.

2. ● Maintain proper fire exits and exit signages (e.g. exit signs that may be operating in the event of a power outage) ● ● ● Fire extinguishers are installed and maintained in easily accessible areas. Proper storage / use of hazardous materials that may be required for storage or operational purposes within the building or in schools. Combustible materials are prohibited in certain areas of the facility. Maintain fire alarm systems to detect and warn of fire. Obtains and maintains a complete inventory of school fire safety equipment. Maintain a high level of training and awareness among students (staff), staff, and other users of the school building. Conduct fire drills at regular intervals throughout the year. According to research, the most common causes of school fires are fires, overloaded electrical systems, high oxygen concentration fuel store areas or inadequate protection, and materials that produce toxic gases when heated. Materials that block fire exits, improperly installed wiring, misuse of electrical equipment, and unlit candles lie unnoticed. ● ● ● ● ● Preventive measures Students need to be trained on how to use certain fire extinguishers, such as fire extinguishers, and any electrical equipment that is left unattended and the candles own tat. School officials should ensure that electrical wiring in the area is regularly inspected. In addition, they should practice fire safety among school facility users, e.g. Disassemble electrical equipment when not in use and replace damaged or old electrical wires. Install detection systems such as heat detectors, smoke detectors, alarm systems and brake glass pin. Establish a fire action emergency plan to let students and teachers know what to do in the event of a fire. Have fire safety signs on any installation e.g. Shows the direction of exit and location of exit visors. Recognize the fire brigade as a partner in fire safety promotion. When you leave a burning dormitory or building do not run back to save anything, your life is more valuable than property. Get out and stand out! If you practice the above precautions, you can record a few fires. It is the responsibility of each individual to ensure that the fire and safety of the school is maintained.

3. MMJ Security and Safety is #1 fire and safety company in UAE. We offer fire and safety solutions for schools. We provide complete fire and safety services in German international school UAE