1 / 5

How to fix Windows Setup Could Not Configure?

Read our blog and follow the steps to fix your u2018Windows Setup Could Not Configureu2019 issue. We have written a comprehensive guided article to fix this issue. Go through our blog and just follow the simple steps to fix this issue.

LukeCarter
Download Presentation

How to fix Windows Setup Could Not Configure?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Steps To Fix Windows Setup Could Not Configure Windows on This Computer’s Hardware Call us : Toll-Free : +1-888-633-7151

  2. The Windows Setup Could Not Configure Windows On This Computer’s Hardware error occurs due to unexpected issue happened with the Intel storage controller driver which was included in the released versions of Windows 7 and in the Windows Server 2008 R2. Well it is found by the Windows Tech Supportteam that this issue has completely being resolved in the Windows 7 SP1 and in the Windows Server 2008 R2 SP1. Steps to fix Windows setup could not configure windows on this computer’s hardware Step 1: Download phase Download all the needed appropriate drivers for the hard disk drive to smoothly perform this process Step 2: Working with another PC Get access to another computer which has full internet connectivity. One should click on the appropriate link to easily download the driver for the hard disk drive and it should either be 32-bit or 64-bit configuration process

  3. Step 3:  Save mode Save the downloaded driver to the DVD or even in the USB flash drive which can easily be taken to the PC, you are installing the Windows operating to. Step 4: Load driver feature Next, start the installation process of the Windows 7 or Windows Server 2008 R2, and simply have an overview for the Load Driver feature. An option known as ‘Where do you want to install Windows?’ will be visible on the screen in the lower right corner. Connect your USB flash drive or even with external drive of the computer on which you’re installing the Windows device as advised byWindows 10 Support Phone Number. Step 5: Managing the DVD One can even take the Windows DVD out of the drive and put the driver DVD into the drive. Click on the “Load Driver” by simply clicking on the option which says that “it checks removable media for storage controller drivers”

  4. Step 6: Windows set-up process Once you have carefully loaded the driver, simply continue with the Windows setup process. The Advanced Drive Format hard drive option will be recognized and Setup process will continue as expected.

  5. Connect With Us:- https://www.microsoftwindowssupportnumber.com/blog/windows-setup-could-not-configure-windows-on-this-computers-hardware/ Website:-  +1-888-633-7151 Toll-Free Number:-

More Related