Solved: Cisco Router Ds Light Blinking |Easy Steps

1. Cisco Router Ds Light Blinking Routers, the network devices, connect the devices on a network to the internet. When a router is turned on and configured, it goes through several stages, which is indicated by the LEDs on the router, since there is no display panel on it. The Cisco routers also have several LEDs on their front panel. The LEDs are DS, US, DSNR, V OK, V1, V2. The DS light indicates the downstream channel connection of the router. If the DS light on your Cisco router is blinking, it means that the router is trying to connect your computer to the internet. You may have issues with your internet if the router's DS light keeps on flashing. Consider the steps that are given below to fix the Cisco router DS light blinking issue. If the connection is not established properly, the DS light may blink. Check whether you have connected the cables correctly to the right ports. Verify whether the Ethernet cable connecting the router and modem is defective. If so, replace the Ethernet cable with a new one. Remove all the connections from the router and reconnect it after a few minutes. Connect the Cisco router to your computer using an Ethernet cable and launch the router interface or terminal. Type reload in the Cisco router interface. Then enter no when prompted to modify system configuration. To confirm, hit the Enter key. Now, the Cisco router will be restarted. If the issue persists, check the Internet Service provider for any issues and resolve them. Restart your router and modem to fix the Cisco router DS light blinking issue. For more assistance...