0 likes | 2 Views
To connect your RangXTD Wi-Fi extender to the Orbi 860 router, begin by plugging in the RangXTD near the Orbi router and powering it on. Wait for the power light to stabilize, then press the WPS button on the Orbi 860 router. Within two minutes, press the WPS button on the RangXTD extender. The devices will attempt to syncu2014look for a solid or blinking LED on the extender indicating a successful connection. Once paired, move the extender to a location halfway between your router and the area with weak signal. Plug it in and wait for the connection light to stabilize again. Finally, test the ext
E N D
7 STEPS TO CONNECT RANGXTD EXTENDER TO ORBI 860
Now, you can connect the RangeXTD WiFi device to the power outlet directly and turn it on. It is your choice to link it through cable or WPS method. Most users select the WPS, have a look at the steps;
Step-1 Power on both the devices.
Step-2 Press Sync button on the Orbi router
Step-3 Press WPS button on the WiFi extender.
Step-4 The devices will connect automatically.
Step-5 Use a good condition pair of LAN cable If you want to use the cables for the connection then;
Step-6 Plug one end to the router LAN port.
Step-7 Plug other end to the Extender Ethernet port.
For Any Quary Visit https://rangesxtd.com/
Marketing Course 2025 August 15 THANK YOU For Listening TEAM 2 Drew Feig Juliana Silva Reese Miller Estelle Darcy