60 likes | 64 Views
Conventional lightning protection systems protect buildings, equipment, and people from lightning strikes by using lightning rods to attract the lightning and conduct the resulting surge current to ground via a grounding wire or the buildingu2019s steel frame. At Lightning Eliminators & Consultant Inc., we are passionate about delivering the best quality solution, especially when it comes to safety and protection. Contact us to find the perfect solution: https://www.lightningprotection.com/<br>
E N D
Trust the Best Lightning Protection Systems for Optimal Safety https://www.lightningprotection.com/
Conventional lightning protection systems protect buildings, equipment, and people from lightning strikes by using lightning rods to attract the lightning and conduct the resulting surge current to ground via a grounding wire or the building’s steel frame. However, the associated electromagnetic pulse (EMP) can cause a surge current to flow through electronic devices in the building, resulting in damage to equipment. • In contrast, the new Dissipation Array lightning protection system prevents lightning damage by inhibiting the lightning strikes themselves. https://www.lightningprotection.com/
DAS interrupts the formation of upward streamers through point discharge, a phenomenon where a well-grounded point exchanges ions between the air and the ground. Point discharge becomes more efficient when the points are connected to a low-impedance grounding system and more ions can be transferred with a greater number of points, interrupting the formation of upward streamers, thereby preventing direct strikes. • The DAS lightning protection system consists of a hemispherical ionizer formed from wires to which a large number of protruding rods have been welded. It is installed at the highest point on the building being protected and connected electrically to a ground current collector buried in the ground • The Dissipation Array System is a key component of your lightning protection system, working with grounding and surge suppression to achieve complete protection. https://www.lightningprotection.com/
A typical system includes: • The Dissipation Array is available in a range of configurations for almost any structure. • A low-impedance grounding system using chemically-charged electrodes (Chem-Rod). • Transient Voltage Surge Suppression (TVSS) to protect against transients traveling through data lines and other conductive paths. • Modular strike prevention devices (SBI) to supplement the Dissipation Array’s area of protection as needed. https://www.lightningprotection.com/
Benefits of installing LEC’s DAS lightning protection systems • Lightning current cannot damage the electronic equipment on the tower. • Million Volts of energy cannot damage the indoor electrical system at facilities. • Service drops due to lightning damage are not an issue any more. • Structural damage by explosive pressure effect of lightning is prevented. • Sudden rise in temperature causing fire and explosions are blocked. • Electromagnetic field of lightning current cannot affect the sensitive electronics on the path of flow to ground. • Most importantly; no incident resulted with injuries or deaths. https://www.lightningprotection.com/
Contact us.. Address: 6687 Arapahoe Rd. Boulder, CO 80303, USA Phone: 303-447-2828 Email: info@lecglobal.com Facebook: https://www.facebook.com/Lightningeliminators/ Twitter: https://twitter.com/lightningprotec https://www.lightningprotection.com/