1 / 4

The Right Way Of Using Alcohol Test Strips

Alcohol test strips are the easiest way to detect the presence of alcohol in the urine. It can be used anytime, anyplace. Know the procedure of using these strips here https://bit.ly/2KTwCrA

12paneltest
Download Presentation

The Right Way Of Using Alcohol Test Strips

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The Right Way Of Using Alcohol Test Strips A simple way to determine if someone has been abusing alcohol, one can use a urine alcohol test strip. This alcohol test strip is designed to check for the presence of alcohol in the urine higher than 0.04%. Ethyl alcohol is the type of alcohol that is detected during the conduction of this alcohol test. This test is a rapid method of detection; however,

  2. the tests can be later confirmed in a laboratory using a technique like Gas Chromatography-Mass Spectrometry (GC/MS). This test is a simple to test, that can be conducted anytime, anywhere. The procedure is simple to carry out. The procedure to use an alcohol test strip: • Once you are ready to perform the test, take the piece out of the foil pouch. Do not break the seal of this pouch if you are going to carry out the analysis at a later point. • The person whose being tested should collect his urine sample in a plastic cup. • On the alcohol test strip, you will be able to see a line that is the MAX line. Now, carefully dip the strip into the urine sample, making sure that it does not exceed the indicated line on the strip. • Let the strip remain dipped for about 15 seconds, and then, take it out of the container, and put it on a flat surface. Now you have to wait for the lines on the test strip to appear. • If the strip develops negative results, they can be read immediately, and you do not have to wait. But, for the positive results to develop, one will have to wait for at least 5 minutes before reading and

  3. analyzing the results. • Do not wait longer than 10 minutes to review the results. Otherwise, a false reading may appear. Interpretation Of The Results On Alcohol Test Strips. Here are the steps to follow to read the results on the test strips: • When the line starts to appear on the test strip after the test has been conducted, just under the test handle, you will be able to see a red or a pink line which is The Control Line ©. The other line that might or might not appear is the Test Line (T). • The Control Line appears on the test strip to confirm that the test has been conducted properly. • If, however, the test line doesn’t appear, it means that the test has not been conducted properly and you might have to repeat the test. • Now, after waiting for 5 minutes, if a faint red or pink line appears on the test strip, it means the test

  4. result is negative. But, if no other line shows up on the alcohol test strip, it says that the candidate has been tested positive. These are the simple steps to carry out the alcohol strip test. WEBSITE : https://12panelnow.com/ CALL : 888-936-6627 Email : thestaff@12panelnow.com

More Related