1 / 21

Measurements and Errors

Measurements and Errors. Definition of a Measurement. The application of a device or apparatus for the purpose of ascertaining an unknown quantity. An observation made to determine an unknown quantity (Usually read from a graduated scale on the device) Excludes counting which can be exact.

zwi
Download Presentation

Measurements and Errors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Measurements and Errors

  2. Definition of a Measurement • The application of a device or apparatus for the purpose of ascertaining an unknown quantity. • An observation made to determine an unknown quantity • (Usually read from a graduated scale on the device) • Excludes counting which can be exact

  3. Kinds of Measurements • Direct (e.g. taped distance, angles measured by theodolite, …) • Indirect (e.g. coordinate inverse to determine distance, coordinate measurement by GPS • What about an EDM distance? Direct or indirect?

  4. Characteristics of Measurements • No measurements are exact. • All measurements contain errors. • The true value of a quantity being measured is never known • The exact sizes of errors are unknown

  5. Definition of Error • Difference between a measured quantity and its true value Where: ε = the error in the measurement y = the measured value μ = the true value

  6. Error Sources • Instrumental errors • Natural errors • Personal errors

  7. Instrumental Errors • Caused by imperfections in instrument construction or adjustment • Examples – imperfect spacing of graduations, nominally perpendicular axes not at exactly 90°, level bubbles or crosshairs misadjusted … • Fundamental principle – keep instrument in adjustment to the extent feasible, but use field procedures that assume misadjustment

  8. Natural Errors • Errors caused by conditions in the environment that are not nominal • Examples – temperature different from standard when taping, atmospheric pressure variation, gravity variation, magnetic fields, wind

  9. Personal Errors • Errors due to limitations in human senses or dexterity • Examples – ability to center a bubble, read a micrometer or vernier, steadiness of the hand, estimate between graduations, … • These factors may be influenced by conditions such as weather, insects, hazards, …

  10. Some of the afore-mentioned errors (instrumental, natural, and personal) occur in a systematic manner and others behave with apparent randomness. They are therefore referred to as systematic and random errors.

  11. Mistakes or Blunders • These are generally caused by carelessness • They are not classified as errors in the same sense as systematic or random errors • Examples – not setting the proper PPM correction in an EDM, misreading a scale, misidentifying a point, … • Mistakes need to be identified and eliminated • This is difficult when their effect is small

  12. Systematic Errors • These follow physical laws and can be corrected as long as they are identified and the proper mathematical model is available • Lack of correction of a fundamental systematic error is often considered amistake • Temperature correction in taping is a typical example

  13. Random Errors • These are the remaining errors which can not be avoided • They tend to be small and are equally likely to be positive as negative • They can be analyzed using the concepts of probability and statistics • They are sometimes referred to as accidental errors

  14. Precision • Due to errors, repeated measurements will often vary • Precision is the degree to which measurements are consistent – measurements with a smaller variation are more precise • Good precision generally requires much skill • Precision is directly related to random error

  15. Accuracy • Accuracy is the nearness to the true value • Since the true value is unknown, true accuracy is unknown • It is generally accepted practice to assess accuracy by comparison with measurements taken with superior equipment and procedures (the so-called test against a higher-accuracy standard)

  16. Example Which is more precise? Which is more accurate?

  17. Target Example • Accurate and precise • Accurate on average, but not precise • Precise but not accurate • Neither accurate nor precise Questions: Can one shot be precise? Can a group of shots be accurate?

  18. Real-World Target for Measurements No bulls-eye

  19. Redundant Measurements • Redundant measurements are those taken in excess of the minimum required • A prudent professional always takes redundant measurements • Mathematical conditions can be applied to redundant measurements • Examples – sum of angles of a plane triangle = 180°, sum of latitudes and departures in a plane traverse equal zero, averaging measurements of the length of a line

  20. Benefits of Redundancy • Can apply least squares adjustment which is a mathematically superior method • Often disclose mistakes • Better results through averaging (adjustment) • Allows one to assign a plus/minus tolerance to the answer

  21. Advantages of Least Squares Adjustment • Most rigorous of all adjustment procedures • Enables post-adjustment analysis • Gives most probable values • Can be used to perform survey design for a specified level of precision • Can handle any network configuration (not limited to traverse, for example)

More Related