1 / 40

Prospect of High Gradient Cavity

Tohoku Forum for Creativity 2013. Prospect of High Gradient Cavity. H. H ayano , 10222013. Remarks of Rongli Geng at IWLC2010 . >60MV/m by Thin-Film coated Cavity. Look review lecture by T. Tajima(LANL) f or “Thin Film coated Cavity”. Nb 3 Sn : tri-niobium tin.

zaide
Download Presentation

Prospect of High Gradient Cavity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Tohoku Forum for Creativity 2013 Prospect of High Gradient Cavity H. Hayano, 10222013

  2. Remarks of RongliGeng at IWLC2010

  3. >60MV/m by Thin-Film coated Cavity

  4. Look review lecture by T. Tajima(LANL) for “Thin Film coated Cavity” Nb3Sn : tri-niobium tin MgB2 : magnesium di-boride Multi-layer thin film concept

  5. T. Tajima

  6. T. Tajima

  7. T. Tajima

  8. T. Tajima

  9. T. Tajima

  10. T. Tajima

  11. T. Tajima

  12. T. Tajima

  13. T. Tajima

  14. T. Tajima

  15. T. Tajima

  16. T. Tajima

  17. T. Tajima

  18. T. Tajima

  19. T. Tajima

  20. T. Tajima

  21. T. Tajima

  22. T. Tajima

  23. T. Tajima

  24. T. Tajima

  25. T. Tajima

  26. T. Tajima

  27. T. Tajima

  28. How to make thin-film on Nb? Look presentation by Chaoyue Cao (IIT) for “Point Contact Tunneling as a Surface Superconductivity Probe of bulk Nb and (Nb1-xTix )N Thin Films” @ 5th Thin Film workshop 2012(Jlab)

  29. C. Cao Atomic layer deposition (ALD) • A thin film synthesis process based on sequential, self-limiting surface reactions between vapors of chemical precursors and a solid surface to deposit films in an atomic layer-by-layer manner.

  30. C. Cao ALD thin film materials

  31. ZnO Si 200 nm 1 μm C. Cao Advantages: • Atomic-level control of thickness and composition • Smooth, continuous, pinhole-free coatings on large area substrates • No line-of-sight limits → excellent conformality over complex shaped surfaces Coat inside Nb SRF cavity with precise, layered structure → ALD • ALD is very good at coating non-planar surfaces

  32. B0 Bi=B0exp(-Nd/lL) d C. Cao Multilayer thin films for SRF • Superconductor-Insulator multilayer [Gurevich, Appl. Phys. Lett.88, 012511 (2006)] • Potential path to high Eacc and high Q0

  33. C. Cao Nb1-xTixN Thin Films made by ALD • Chemistry: (NbCl5:TiCl4) + Zn + NH3 at 450°C, 500°C • Can vary Ti content with NbCl5:TiCl4 ratio (1:2 ~ 20% TiN) • Impurity content: 0.05 atom % Cl • 21 sec/cycle • 2-7-1-5-1-5 ("NH3 dose"-"purge"-"MClx dose"-"purge"-"Zn dose"-"purge ") TEM

  34. C. Cao Nb1-xTixN-based superconductor-insulator structures Aluminum nitride: AlN • Oxygen-free insulator, stable interface with Nb(Ti)N • Good thermal conductivity (285 W/m-K) • Similar structure to Nb(Ti)N • 0.27% mismatch between in-plane spacing of (001)-oriented AlN and (111)-oriented NbN • Can be grown with AlCl3 and NH3 at same temperature as Nb(Ti)N

  35. C. Cao 49nm Nb0.8Ti0.2N on AlN Tc= 12.8K by SQUID 2Δ/kTc = 3.4 - 3.6 (BCS limit) Δ(meV) Γ(meV)

  36. C. Cao 28nm Nb0.8Ti0.2N (without AlN layer) Tc= 8.3K by SQUID Δ(meV) Γ(meV)

  37. C. Cao Conclusion • Point contact tunneling (PCT) technique is ideal for measuring the local surface superconducting energy gap and density of states (DOS) of samples with a natural barrier. • Nb1-xTixN on AlN gives Tc = 12.8K, Δ= 1.8-2.2 meV, 2Δ/kTc = 3.4-3.6(BCS limit). • Nb1-xTixN (without AlN) Tc = 8.3K. High quality gap region DOS, low zero bias conductance. Δ= 1.8-2.2 meV. 12.8 K Strained layer, low Tc Substrate

  38. Application of “thin-film on Nb” to ILC? Technology of; nm-level Smooth Nb cavity surface, (2) Well controlled thin-film formation on Nb cavity, will be required. Then, we can reach >100MV/m with TESLA cavity shape. Tumbling, electro-polish, etc. Hydroforming without welding. Atomic Layer Deposition (ALD)

  39. End of slide

More Related