1 / 4

Ancillary Services

Ancillary Services. Regulation Example Customer A: 12-cp Aux Load within WALC = 150,000 kW Wind generator serving WALC Load = 80,000 kW (nameplate) FY2011 (current) regulation rate = $.165/kW-month Monthly Invoice: Load 150,000 x $.165 = $24,750.00

zada
Download Presentation

Ancillary Services

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ancillary Services Regulation Example Customer A: 12-cp Aux Load within WALC = 150,000 kW Wind generator serving WALC Load = 80,000 kW (nameplate) FY2011 (current) regulation rate = $.165/kW-month Monthly Invoice: Load 150,000 x $.165 = $24,750.00 Wind 80,000 x $.165 = 13,200.00 Total $37,950.00

  2. Ancillary ServicesImbalance charge Example Wind generator serving WALC Load = 80,000 kWh (forecast) • Assume no load imbalance Actual Generation 75,000 kWh Imbalance (Generator) 5,000 kWh (5 MWh) Assuming on-peak, generator would be assessed imbalance penalty based on proposed imbalance structure: • 100% x 4 MWh = 4.0 MWh (1st tier imbalance-bandwidth is +/- 1.5% of gen, 4 MWh minimum) x index price (or in-kind settlement) • 110% x 1 MWh = 1.1 MWh (based on 2nd tier penalty: +/-1.5% to 7.5%, 4MWh-10MWh minimum) x index price (or in-kind energy settlement) • Calculated each hour for all 720 (or 744) hours of the month IN ADDITION TO REGULATION CHARGE SHOWN IN PREVIOUS SLIDE

  3. Ancillary ServicesRegulation Charging • Intermittent generation resources not serving load within the balancing authority area will be required to be dynamically metered out of the balancing authority • Metering changes will be required for such resources • No export schedule from WALC; balancing authority won’t “see” this load • Would still require customer to purchase transmission service as appropriate

  4. Ancillary ServicesNon-Standard Loads for Regulation • Non conforming or non-standard loads are defined as a single plant or site with a regulation capacity requirement of 5 MW or greater on a recurring basis and whose capacity requirement is equal to 10% or greater of its average load. • For regulation of these loads, the Rate Schedule will require the customer to execute a separate agreement. The “recurring basis” is measured at 5-minute intervals.

More Related