1 / 20

Translation – movement along X, Y, and Z axis (three degrees of freedom)

Translation – movement along X, Y, and Z axis (three degrees of freedom). Rotation – rotate about X, Y, and Z axis (three degrees of freedom). 3 DOF. Z. Point. Y. Y. 2 DOF. X. X. 6 DOF. Z. 3 DOF. Rigid Body. Y. Y. X. X. One Link (3DOF). Two Links (6DOF).

yan
Download Presentation

Translation – movement along X, Y, and Z axis (three degrees of freedom)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Translation – movement along X, Y, and Z axis (three degrees of freedom) Rotation – rotate about X, Y, and Z axis (three degrees of freedom)

  2. 3 DOF Z Point Y Y 2 DOF X X

  3. 6 DOF Z 3 DOF Rigid Body Y Y X X

  4. One Link (3DOF) Two Links (6DOF) Two Links + One Joint (4DOF) One Link (3DOF)

  5. The Revolute joint (pin or hinge joint) - one degree of freedom(Reduces 2 degrees of freedom in ) It allows pure rotation between the two links that it connects (R joints)

  6. The Sliding joint (prism or piston joint) - one degree of freedom(Reduces 2 degrees of freedom) It allows linear sliding between the two links that it connects (P joint)

  7. DOF ≤ 0 structure mechanism DOF > 0 DOF = 3(L – 1) – 2J1 – J2 DOF = degree of freedom (Planar) L = number of links, including ground link J1 = number of 1 DOF joints J2 = number of 2 DOF joints

  8. DOF = 3(L – 1) – 2J1 – J2 DOF = 3(4 – 1) – 2(4) – (0) = 1 Slider crank mechanism Four Bar mechanism L = 4 , J1 = 4 pin connections, J2 = 0 L = 4 , J1 = 3 pin connections + 1 slider = 4 J2 = 0 DOF = 3(4 – 1) – 2(4) – (0) = 1

More Related